- Dental >
- Dental laboratory >
- Other dental laboratory equipment
Other dental laboratory equipment

The device enables the photopolymerization of all light-curing materials in the wavelength range 280-580 nm and thus allows the production and processing of light-curing materials of different consistency and pigmentation as well as the ...

BiomicTM Stain/Glaze is the first bionic stain layer concept, newly developed by Aidite to quickly replicate natural teeth with the highest esthetics and minimal effort. BiomicTM Stain/Glaze gives dental technicians an unsurpassed fast ...

S-U-UNOPOL Electrolytic Polishing Unit Item No. 15210 Electrolytic polishing unit for 1 cast chrome denture. Compact and well proven construction – especially convenient for small laboratories. Variable, 6-step current control up to ...
SCHULER-DENTAL GmbH & Co. KG

Pressure forming unit with automated thermoforming process with self-sufficient, integrated production of compressed air. The Erkopress ci motion has a powerful, integrated compressor with reserve compressed air. Thereby the unit is independent ...
ERKODENT Erich Kopp

Temperature range: 5 °C - 35 °C
Humidity range: 0 % - 80 %
CEREC SpeedFire is the smallest and fastest sintering furnace on the market and can typically sinter a crown in approximately 14 minutes1. The advantages of full-contour zirconia can thus also be used for chairside treatment. CEREC ...
DENTSPLY MAILLEFER

Artex model plates enable easy and quick retaining due to integrated magnets in the upper and lower part of the Articulator. Suited for multiple use.
Amann Girrbach

The INTEGRAL 2 generator uses the principle of electro-subtraction. The workpiece is submerged in an acid bath, the high current flowing through it allows a quick and effective polishing (5 to 15 minutes). Curving stainless steel anode ...
ugin dentaire

The liquids are simply applied to the monolithic or anatomical restoration after milling using a metal-free brush or brush pen, preferably with a Liquid Brush Pen. The Esthetic Colorant diffuses into the pre-sintered structure and is ...

Our customers’ unique applications are becoming ever more complex, and installation space, fluidic performance and cost savings are critical factors. This places greater demands and more exacting requirements on the components used. Type ...


ost-curing is requierd in oder to obtain the final material properties. After 3D printing in photopolymer resin-based materials is not yet fully cured. Post-curing is necessary to reach full monomer conversion for a various purpose. To ...

The powerful Wasi-Steam Compact is a reliable steam cleaner with a wide range of application. This steam cleaner is one of the most powerful units on the market. Range of application: Thorough and efficient it is suitable for all cleaning ...
Wassermann Dental-Maschinen

Temperature range: 32 °F - 2,200 °F
The Pro 200 and the Pro Press 200 Porcelain Furnaces are affordable yet intelligently designed with cutting edge technology. They have advanced cycles for e.max® , In Ceram®, Wol-Ceram®, Captek™, sintered alloys and advanced porcelain ...
Whip Mix Corporation

The 5-axis grinding center, GrindSmart®Nano5, has been designed to manufacture medical, dental and industrial cutting tools with diameters as large as 6.35 mm (.25") in HSS, stainless steel or carbide material.

Mounting Plates made out of rugged PVC for the easy assembly of the model. Additional information Weight - 0,2 kg
IML Instrumenta Mechanik Labor System GmbH

Post-curing maximizes material properties for stereolithography prints, improving parts' strength and performance. Form Cure precisely combines heat and 405 nm light to consistently post-cure prints. Form Cure is designed for curing ...

Temperature range: 1,650 °C
TecnoSint is the compact furnace for sintering zirconia and is a device that fully meets the most varied requirements, not only in terms of economic efficiency and reliability, but above all as with respect to sintering quality of modern ...

Pure Breeze Fume Hood – 10370 $1,699.00 Removes fumes, smoke and odors generated by burnout furnaces, monomer and most laboratory processes Can be used as a general room air purifer for rooms up to 1000 square feet if floor space is ...
Vaniman

Temperature range: 0 °C - 1,100 °C
✓ Independent plate heating muffle Stainless steel outer casing ✓ Door with parallelogram opening ✓ 2 independent abrasive modules Designed with the criteria acquired in over 70 years of experience, Manfredi pre-heated roller furnaces ...
Manfredi

Temperature range: 0 °C - 1,650 °C
More efficient thanks to its high capacity. Thanks to the size of the heating chamber, you can sinter your works including up to 80 elements at once. With 4 high-quality resistors (MoSi2), it offers the freedom of sintering your works ...
Redon Technology

The METASYS place selection valve is supposed to be installed in the suction line, either in the wet or dry area. The place selection valve is a controllable locking module for suction lines (place selection valve for central suction ...

Temperature range: 0 °C - 1,200 °C
Capacity: 22 l
Automatic programmable dental furnace for metal and pure ceramics. designed for all available types of dental metal ceramics 255 individual programs completely controlled process - 16 programmable parameters in every program improved ...
VOP

The Zfx art.liners, a set of 5 different brushes, are ideal for manufacturing fully anatomical zirconium work. Every brush has a certain job to do – from painting the unsintered zirconium to applying the glaze to the finished work. The ...

Temperature range: 1,800, 1,650 °C
Capacity: 90, 120 l
SINTRA PRO/90zr & SINTRA PRO/120zrf are at the forefront of the rapid evolution of sintering zirconia. TECHNOLOGY The visuals It’s all about accessibility and intuitiveness. The full touch 7” LCD screen is user friendly with ...
ShenPaz Dental Ltd

Phasor™ Composite Warmer uses near-infrared technology to rapidly warm composite compules. Warming composite significantly lowers the viscosity of the material, resulting in better adaptation, reduced voids, microleakage and improved ...
Vista Dental Products

Features: • Heats composite material to 98°F (37°C), 130°F (54°C) or 155°F (68°C) • Maintains constant temperature • Increases degree of cure • Warms Finishing Instruments Benefits: • Shortens curing time by over 80% • Improves composite ...
AdDent, Inc.
Your suggestions for improvement:
Subscribe to our newsletter
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining