- Dental >
- Dental laboratory >
- Other dental laboratory equipment
Other dental laboratory equipment

Temperature range: 0 °C - 1,600 °C
Technical info Max. temperature: 1600°C Time to reach Max. temp: 30 min. Ramp rate: Max. 56°C/min Cooling time: 30-180 min Voltage Range: 220-240 V ~ 50 Hz Current: 15 A Power: 3300 Watts Height: 55 cm Width: 34 cm Depth: 43 cm Weight: ...

New Light Box is apolymerization unit with with last generation multi-die LEDs, perfect to light-cure resins. It works on a vacuum pump to avoid the dispersion layer with a wave frequency between 360 and 520 nm.

Flash triggers for fast and safe polymerisation of 3D prints in an inert gas atmosphere. Also suitable for other light-curing materials in the light wave range 300-700 nm. The Otoflash G171 Std has two flashes that emit light from below ...

Temperature range: 20 °C - 1,300 °C
A furnace constructed for sinter metals and thermal stabilization – annealing, which is possible because of the use of inert gas. It is necessary to prevent uncontrolled oxidation and subsequent scaling. Sintering programme control was ...
DENTAS

The D-S 100 steam blasting unit is largely the same as the D-S 100 A model, but has a somewhat simpler design. Water can only be supplied to this unit manually. When the water tank is almost empty, an acoustic signal sounds and a display ...
Harnisch + Rieth

Stepless tilting model platform with locking screw for models of various sizes. Models can be locked quickly and securely between the three toothed clamping pins by turning the star-shaped knob.
OBODENT

Stitched polishing disc White cotton polishing disc with plastic core Ø 100mm

Articulators MENFIX are individual articulating devices type Non – Arcon for fabrication of all types of dental prosthetics. • Original solid construction made of glass filled composite • Lightweight – from 580 g • Magnetic splitcast ...
MENSADENT

2-Way Normally Closed Insulated Core -> Open when energized. THREAD: Cable gland with ORIFICE: Ø 1.2 mm - ( Kv 0.05) SEALING: Silicone seal (SI) FLUIDS: Air, high-temperature gases, non-toxic for water, dairy products, beer and soft ...
Thermoval

60FC-1-TS Polishing Unit 12345 (Total votes: 0) 60FC-1-TS The 60C-1-TS is designed for users who desire a larger work area for polishing and grinding operations. The larger polishing hoods (11” high x 18” deep x 14” wide) allow technicians ...
Handler MFG

Temperature range: 0 °C - 1,100 °C
The KDF 007EX Burnout Furnace has a muffle chamber built with newly developed insulating ceramics resulting to sufficient heat rise. The sufficiently wide muffle chamber has a large loading capacity that can accommodate 35 pieces of 1 ...
KDF

Ceramic brush with with high grade synthetic hairs without ball. Dense and conical tip ensures good storage capacity Ergonomically shaped Top price-performance ratio

Effective collection of aerosols at a distance of 20 cm from the patient’s mouth thanks to a flow rate of 450 m3 / h effective at the inlet (hood) Filtration efficiency up to 99.9995% on 0.12 micron particles including viruses (such ...

Supreme S300 high-capacity curing unit for curing dental materials Key features: Cures dental materials such as universal trays, composites & block-out materials Polymerisation chamber fits up to 4 models 4 lamps Reliable and uniform ...
BA International

Temperature range: 0 °C - 1,100 °C
The furnace is suitable for firing ALL types of dental porcelain. CLASSIC’s latest model features new programming options, which ensure consistent process reproduction and creation of high quality restorations. The main advantage of ...
ROKO

Save Time - Fast Curing High power LEDs and broadband LEDs to save fabricating time. Save Cost - Stable Light Volume High power LEDs with the constant current circuit; there's no need to change UV fluorescent light tube. Easy To Use ...
Dentmate Technology Co., Ltd.

1/4 HP - 300 w - 2800 RPM 220V – 50 HZ option 110 V. Continuous duty electric motor. Supplied with 2 tapered fit accessories: Left buffing Wheel holder and Milling tool holder. Optional: right buffing Wheel holder and grinding wheel holder. ...
Sabilex de Flexafil S.A.

All SAM articulators are supplied either for use with screw type or magnetic (MPS) type precision mounting plates. Existing screw type mounting plates types can be easily converted to the new MPS magnetic mounting plate system. Optionally ...

Conometric polisher Conometric polisher Specifically intended to make conometric crowns Eliminates the need to mill on metal, the conometric crown using the isoparallelometer. In fact it is only necessary to work the wax cap ...
ARTIGLIO SNC

Temperature range: 0 °C - 1,100 °C
Pre-heating oven for skeletal prostheses with an electronic card for storing 10 cycles, each of them includes 4 stages with temperatures, rising speed and standby times that may be preset by the operator according to his needs. Possibility ...
EUROCEM

Heater with 5 programs 4 preset and modifiable programs 1 settable and modifiable program (Temperature – Time) Program 1: 37° C – 3 hours Program 2: 37° C – 6 hours Program 3: 85° C – 12 minutes Program 4: 42° C – 20 minutes Program ...
SILFRADENT SRL

Specially designed aluminum oxide impregnated felt disks for polishing of direct tooth colored restorations with easy to use snap-on system. INDICATIONS Developed to achieve high gloss polishing of all types of direct tooth coloured ...

Temperature range: 0 °C - 1,550 °C
O Product Description Q1 No harm to the human body Soft Métal is consisted with 100% pure Chrome Cobalt alloy powder. 07 No More Casting It has easy process, compare with casting. Moreover strength. élongation and bonding better than ...
DENSTAR CO.

VAPORDENT is a powerful steam generator for cleaning and sanitizing medical instruments. The machines of this line represent the ideal tool for the preparation of the ceramics implants, for the cleaning of finished prostheses, muffles ...
Bieffe Italia

Wavelength selectable (400~405nm / 460~465nm) Faster curing by using LED lamp - 4 times stronger brightness Protecting from overcurrent and overheating by using SMPS Stable power supply by adopting long life cycles Adjustable brightness INDICATIONS: ● ...
Your suggestions for improvement:
Subscribe to our newsletter
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining