Laboratory fume hoods

Face velocity: 0.3 m/s - 0.8 m/s
Power: 700, 400, 500 W
Depth: 800 mm

It is a new type of technical equipment for air-conditioned workshop and clean workshop. Widely used in electronics, chemical, machinery, universities, laboratories and other fields. The fume hood can be used for the operation of potentially ...

Face velocity: 0.4 m/s - 0.6 m/s
Power: 400, 500 W
Depth: 830, 940 mm

In chemical laboratories, a lot of odors, moisture and corrosive substances will be generated during the experiment. To protect the safety of users and prevent the spread of pollutants in laboratories, fume hoods are used. Features: 1. ...

Face velocity: 0.3 m/s - 0.5 m/s
Power: 400, 450 W
Depth: 750 mm

Vertical Laminar Flow Cabinet is an essential piece of equipment for laboratories and industries that require a clean, particle-free environment. Its advanced features, energy efficiency, and robust construction make it a trusted solution ...

Power: 1,200, 1,300 W
Depth: 760 mm
Height: 655 mm

Haier Biomedical Ductless Fume Hood utilizes carbon filtration to protect laboratory personnel and the environment from toxic chemical fumes, odours, and particles. It is widely used in universities, public health, chemical and petrochemical ...

Power: 1,200 W
Length: 1,490 mm
Depth: 1,550 mm

Applicable for the safe sample swab of biological samples in hospitals, testing institutions, high-speed trains, railway stations, airports and highway junctions. Product Features Positive pressure protection in the booth, the pressure ...

Positive Pressure Protection Virus Isolation to Create a Safe Sample Swabbing Environment Applicable for the safe sample swabbing of biological samples in hospitals, testing institutions, high-speed trains, railway stations, airports ...

Composite cabins and metal containers are designed for outdoor installation. This equipment includes two compartments, one dedicated to the supply of air, the other to the production of oxygen. A paramagnetic thermostatic sensor with ...

Face velocity: 0.3 m/s - 0.8 m/s
Power: 400, 500 W
Length: 1,000, 1,220, 1,525, 1,830 mm

Maximum Opening: 520mm Work Surface Height: 750mm Control System: Microprocessor controller with LCD display FMH series fume hood is a kind of negative pressure ventilation system for protecting operator and laboratory, utilizes ...

Face velocity: 0.2 m/s - 0.6 m/s
Power: 110 W
Length: 550 mm

Vertical Laminar Flow Cabinet provides sample protection as purified air travels across the working zone of the cabinet in a vertical, unidirectional stream and leaves the main work chamber across the entire open front of the cabinet. ...

Face velocity: 0.4 m/s - 0.6 m/s
Power: 126, 42 W
Length: 800, 1,000, 1,600, 1,275 mm

99.995% high efficiently filtering Advanced VOC Detector port LED touch screen control system Silent turbine fan Explosion proof lighting system Transparent acrylic glass>6mm thickness 1、Advanced VOC Detector port detects pollution ...

Face velocity: 0.5 m/s

AFBc weighing cabinets are designed to offer high levels of protection and containment to the user, the environment and the product against airborne particles. Inside the cabins, an ISO 5 classification level according to ISO 14644-1 ...

Face velocity: 0.5 m/s

BAG IN BAG OUT weighing cabinets are designed to offer high levels of protection and containment to the user, the environment and the product against airborne particles. Inside the cabins, an ISO 5 classification level according to ISO ...

Length: 260 cm
Depth: 240 cm
Height: 300 cm

Short in stock, limited regions to supply, please contact distribution supervisor to learn more about the availability in your region. Size: 3 × 2,4 × 2,6 m Positive pressure system (fan): 30Pa±2 Filter: available Intercom system: ...

Length: 250 cm
Depth: 190 cm
Height: 250 cm

Short in stock, limited regions to supply, please contact distribution supervisor to learn more about the availability in your region. Size: 2,5 × 1,9 × 2,5 m Positive pressure system (fan): 30Pa±2 Filter: available Intercom system: ...

Dedicated to the laboratory and industry use, specifically for the protection of the product manipulated. Moreover, ensures excellent laminar flow at the worktop level thanks to the balanced perforation, and thanks to the considerable ...

Trimming Tech hoods are designed to the highest quality standards so as to meet all operator requirements in relation to the prevention of chemical risk during grossing of histological samples. Made of stainless steel, they are equipped ...

Lab Tech fume hoods are the ideal solution for mounting and staining operations. Designed for chemical and biological risk prevention. Front and top vapour extraction system. Construction features - Stainless steel structure - ...

Laboratory fume hood with extraction from top and front, to be used for manual staining, slide mounting or as an area for liquid transfer. It is suitable for any laboratory benches.

They are a convenient solution for process protection, dispensing or sampling activities. FPS offers standard modular solutions for: Vertical Laminar Air Flow units, to be used when a class A (as per EUcGMP) is requested to protect ...

FPS may design and install turnkey solutions, up to ISO8 classification, complete with: Partitioning walls, manufactured with high pressure laminated sheets, stainless steel, carbon steel, complete with coving and accessories when ...

Power: 130, 400, 320, 225, 145 W
Length: 814, 1,014, 1,814, 1,314, 1,614 mm
Height: 1,091, 1,131 mm

Power: 400 W
Length: 1,200, 1,500, 1,800 mm

The Fume Hood (with Pipes) is the primary barrier in the chemistry laboratory that protects experimenters from hazardous chemical fumes, a high-efficiency safety device for suppression of toxic, irritating or inflammable gases. It may ...

Depth: 830 mm
Height: 1,575 mm

The NU-565 sets the bar for Class II Type B2 performance by complying with not only the biological safety cabinet standards of NSF/ANSI 49 but also the fume hood requirements of UL 1805 and ASHRAE 110. Overview The NU-565, a Class ...

Depth: 778, 777 mm
Height: 2,350 mm

The NU-620 employs a “piston of air” design that is configurable with dual-sided access for workflows needing flexibility in tight spaces. Overview The AllerGard NU-620 Dual Access Animal Transfer Station (ATS) employs a “push-pull” ...

Depth: 780 mm
Height: 2,289 mm

The NU-620M uses independent supply and exhaust modules with separate impellers and HEPA filters to create a “Push-Pull” airflow system for a work area specially configured for Innovive® mouse cages. Overview The NU-620M uses an impeller ...

Power: 161 W
Depth: 700 mm
Height: 1,285 mm

Recirculating Fume Cupboards can be installed anywhere within your workspace and, thanks to our advanced carbon filtration technology, require no ducting to an external environment. HIGH QUALITY MANUFACTURE Constructed from Fully ...

Power: 70 W
Depth: 663 mm
Height: 1,267 mm

Fully compliant to BS EN ISO 14644 & BS EN 1822 for Air Cleanliness and High Efficiency Filters, the cabinets are equipped with ULPA filters and often used for applications involving Sterile Product Compounding, Tissue Culture, Electrical ...

Power: 138 W
Depth: 721 mm
Height: 1,195 mm

The cabinets are equipped with ULPA filters and often used for applications involving plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. HIGH QUALITY MANUFACTURE The ...

Face velocity: 0.4 m/s - 0.6 m/s
Power: 65 W
Depth: 620 mm

ERLAB filtering chemical fume hoods provide unrivalled filtration quality, ensuring a superior level of user protection to all other filtration or extraction devices. By capturing toxic gases at source and filtering them with the most ...

Face velocity: 0.4 m/s - 0.6 m/s
Power: 65 W
Depth: 620, 1,110 mm

ERLAB filtering chemical fume hoods provide unrivalled filtration quality, ensuring a superior level of user protection to all other filtration or extraction devices. By capturing toxic gases at source and filtering them with the most ...

Face velocity: 0.4 m/s - 0.6 m/s
Power: 105 W
Depth: 749 mm

ERLAB filtering chemical fume hoods provide unrivalled filtration quality, ensuring a superior level of user protection to all other filtration or extraction devices. By capturing toxic gases at source and filtering them with the most ...

The laboratory uses chemicals generating harmful gases, odors and fumes that hinder the work environment and are bad for health, but the PURIFUME is essential equipment to maintain a pleasant laboratory work environment by discharging ...

The UV Cabinet 4 is designed for inspecting thin-layer chromatograms or other objects under UV light in absence of ambient light. The UV Cabinet 4 consists of a UV Lamp 4 and the Viewing Box 4. The front of the Viewing Box 4 is closed ...

ALBIAN vertical laminar flow cabinets offer the highest level of operator protection, minimizing the risk of possible cross-contamination with other products or processes through HEPA filtration. Robust construction and high reliability ...

Length: 2,520 mm
Depth: 3,000 mm
Height: 2,630 mm

The isolator is designed with a partition wall system and it’s permanently installed in a place chosen by the customer. The device is equipped with a complete ventilation system dimensioned to ensure its required flow and speed ...

Depth: 120 mm
Height: 180 mm

This specialized exhaust unit which is to be placed on top of the table, guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations. Airflow travels over the entire working area ...

Depth: 600 mm
Height: 700 mm

This specialized exhaust unit made of stainless steel (Material No. 14301 – ANSI 1.4301) which is to be placed on top of a table, guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations. ...

Depth: 120 mm
Height: 180 mm

This specialized exhaust unit which is to be placed on top of the table, guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations. Airflow travels over the entire working area ...

The economical ChemFAST Premium reduces the overall energy consumption of a laboratory by up to 80% compared to conventional chemical fume hoods. FASTER's newly developed hybrid chemical fume hood combines 3-stage airflow technology ...

The ChemFAST Sharp is a chemical fume hood from FASTER, which is suitable for connection to an exhaust system and complies with EN IS0 14175 3-6. The air flow is based on the principle of variable air-flow, where the supply air speed ...

The ChemFAST Classic is a chemical fume hood suitable for connection to an exhaust air system and complies with EN IS0 14175 1-3. The fume hood is based on the principle of constant air flow. The supply air velocity can be manually ...