Other laboratory infrastructure

Capacity: 1,091 l - 1,391 l
Temperature range: -30 °C - -9 °C
Height: 213.5 cm

Sensitive substances cannot be subjected to large deviations from the set storage temperature. Liebherr freezers guarantee a minimal temperature fluctuation of no more than ±5 °C. This means that your valuable contents are optimally protected ...

Capacity: 382 l
Temperature range: -86 °C - -40 °C
Height: 196.6 cm

Ultra-low temperature freezer, 1-section, width 797mm, gross capacity 402 L. Temperature range -40 / -86°C, white exterior, stainless steel interior, air-cooled refrigeration system. Climate class 4, Refrigerants R 290 / R 170, ...

The highest-quality double distillates Puridest stills provide ultra-pure, low-gas, germ and pyrogen-free distillate. They purify any raw water to produce a distillate with conductivities down to below 1.6 µS/cm. It complies with DAB ...

Reliable and robust, low-maintenance and easy to install The maxim of the Puridest stills is quality and simplicity. They provide high-quality distillate - ultra-pure, low-gas, germ and pyrogen-free for dilution of reagents, sets of ...

Capacity: 50 l

PHCbi's MLS-530L-PE laboratory autoclave provide a safe and reliable high pressure steam sterilizing environment within a unit that is particularly easy to use. The Permission management function can be set to security High or Low and ...

Capacity: 80 l

PHCbi's MLS-830L-PE laboratory autoclave provide a safe and reliable high pressure steam sterilizing environment within a unit that is particularly easy to use. The Permission management function can be set to security High or Low and ...

Capacity: 18, 23 l
Temperature range: 121 °C - 134 °C
Width: 650, 750 mm

BKM-K18/23N sterilizer series is an N-level sterilizer. It discharges the cold air in the sterilization chamber by gravity displacement, saturates the internal steam, and reaches the set pressure and temperature. To achieve the purpose ...

Capacity: 50, 75 l
Temperature range: 105 °C - 134 °C
Width: 700 mm

1. Steam water internal circulation. 2. Pulse vacuum exhaust to ensure the effect of steam sterilization. 3. Mobile probe detects to ensure the internal temperature of liquid directly, to ensure the sterilization effect of liquid ...

Capacity: 1,200 l
Temperature range: 0 °C - 139 °C
Width: 1,760 mm

The main body of the annular stiffener has higher strength and stability, more uniform stress and temperature distribution. The use of pressure transmitters for pressure control and pneumatic valves for drainage, Intelligent and efficient. With ...

Compact central system Overload safety switch Medically approved, in accordance with IEC 60601-1 Easy plug-and-play system that reduces time-to-market Features 3 motor output (DIN8) General current limiter (Max 10A) and protection ...

Rechargeable battery that allows operation during power outages Overload protection Medically approved, in accordance with IEC 60601-1 Easy plug-and-play system that reduces time-to-market Features 3 or 5 motor outputs (DIN8) General ...

Centralised system that has stored positions and synchronised or parallel movement Overload protection Approved for medical use, complies with IEC 60601-1 Easy plug and play system shortening time to market Features 3 or 6 motor ...

With the integrated intraoral camera or integrated X-ray sensor, the Full Touch control panel microprocessor supports image management and adjustment of their basic parameters.

Capacity: 18 l
Temperature range: 105 °C - 138 °C
Sterilization cycle time: 0 min - 999 min

For medical, healthcare, scientific research and other related industries to disinfect medical devices, laboratory appliances and materials that may come into contact with blood or body fluids. Mainly used in ophthalmology, stomatology, ...

Capacity: 45 l
Temperature range: 105 °C - 138 °C
Sterilization cycle time: 0 min - 999 min

For medical, healthcare, scientific research and other related industries to disinfect medical devices, laboratory appliances and materials that may come into contact with blood or body fluids. Mainly used in ophthalmology, stomatology, ...

Composite cabins and metal containers are designed for outdoor installation. This equipment includes two compartments, one dedicated to the supply of air, the other to the production of oxygen. A paramagnetic thermostatic sensor with ...

Best results – unmatched ergonomics! Pipette design and good pipetting practice have always been in the focus to improve ergonomics and reproducibility of pipetting. For the design of the ASSIST, INTEGRA kept these critical factors ...

Achievement of the right temperature in the PCR thermal cycler block is essential to obtain reliable, reproducible PCR runs. Regular checking of the block temperature is not only essential for the next audit, but gives you the peace of ...

With small working volumes, compact design and advanced control and information management options the Eppendorf DASbox Mini Bioreactor System addresses demands in research and early process development. Combined with the DASware Software ...

Eppendorf DASGIP Parallel Bioreactor Systems are designed to deliver optimal bioprocess performance in benchtop configurations. Scalable monitoring and control functionality enable users to achieve valid and reproducible results in an ...

Flow chemistry made easy and affordable with IKA FLOW. Its secret: Unlike other commercially available flow chemistry equipment, you just purchase the necessary part of the flow chemistry apparatus. The portable IKA FLOW is an attachment ...

EasySyn is the reactor system for organic or aqueous syntheses. It ensures safe and reproducible chemical reactions on the way from laboratory to pilot scale. Our EasySyn 5000 Advanced package comprises a complete reactor system for ...

EasySyn is the reactor system for organic or aqueous syntheses. It ensures safe and reproducible chemical reactions on the way from laboratory to pilot scale. Our EasySyn 5000 Starter package comprises a complete reactor system for ...

Who could’ve imagined so many zones of hot runner temperature control packed into such a small controller footprint? Husky did. Our very affordable Neo5 hot runner controller can support up to 48 zones—perfect for low-to-medium-cavity ...

Optimized for 24- to 96-cavity applications, the Delta5 supports up to 128 zones of hot runner temperature control, making it well suited for any molding market from automotive to medical. With its 15.6" full-color high-definition touchscreen ...

As the flagship Altanium operator interface, the Matrix5 controller is truly a mold control solution like none other in the molding industry. From its 22" high-definition touchscreen and powerful Windows-based industrial computer, the ...

V3.0, 4-Quadrant PWM with RS232 or CANopen interface Supply voltage: - 6 ... 30 V DC Max. continuous output current: - 1,4 A Peak current: - 5 A

A motion controller with even more possibilities: With the new MC 3602 B and MC 3606 B motion controllers, the selection and commissioning of drive systems is now even simpler. With the compact MC 3602/06 B, DC-motors, brushless DC-motors ...

A motion controller with even more possibilities: With the new MC 3602 B and MC 3606 B motion controllers, the selection and commissioning of drive systems is now even simpler. With the compact MC 3602/06 B, DC-motors, brushless DC-motors ...

VLB-303-2 and VLB-303-2-ST are the new hand-foot-clothing monitors where a small footprint, a robust stainless steel surface and a detection technology based on failure-safe plastic scintillation detectors are the key features. The plastic ...

ARGO is an automatic dispensing system for vials. The equipment is designed and produced to dispense radiotracers used in PET and SPECT diagnosis and therapeutic radiopharmaceuticals. ARGO is a system that complies with the cGMP guidelines ...

ARGO-T (TRANSSEPTAL) is an automatic dispensing system for closed vials able to fill a vial through rubber stopper. The equipment is designed to dispense radiotracers used in PET and SPECT diagnosis and metabolic radiotherapy. ARGO-T ...

Capacity: 70 l - 1,580 l
Temperature range: 140 °C
Width: 730, 830, 970, 1,290 mm

The Systec H-Series floor-standing autoclaves of the performance category HX can be used for all laboratory applications, even for sophisticated sterilization processes and are available in 16 different sizes with 65 to 1580 liters chamber ...

Capacity: 90 l - 1,665 l
Temperature range: 140 °C

The new generation Systec H-Series 2D double-door/pass-through autoclaves of the performance category HX can be used for all laboratory applications, even for sophisticated sterilization processes and are available in 13 different sizes ...

Capacity: 40 l - 166 l
Temperature range: 140 °C
Width: 500, 550, 650 mm

The Systec V-Series of top-loading vertical autoclaves in 8 different sizes with 40 to 150 liters chamber volume is distinguished by its small footprint and high chamber capacity. Result: optimal loading capacity with most standard media ...

Capacity: 50, 75, 35, 100 l
Temperature range: 116 °C - 134 °C
Sterilization cycle time: 4 min - 120 min

Hand wheel translation and quick opening structure Internal steam cycle High quality stainless steel material With drying function Microcomputer automatic control,arbitrary setting sterilization parameters Safety interlocking device Digital ...

Capacity: 5.2 l
Temperature range: 135 °C - 138 °C
Width: 58 mm

The sterilization effect is reliable and rapid. The whole process of non-wrapped sterilization takes 9 minutes, which is suitable for multi-department equipment operation and emergency. Sterilization chamber size :38CM*18CM* 7.8cm; ...

Temperature range: 1,200 °C

• High purity fibrous alumina insulation for maximum energy saving; • Double layer steel structure with air cooling fan to keep furnace’s exteriors safe to touch; • Safety interlock with automatic power off the furnace when door ...

FPS may design and install turnkey solutions, up to ISO8 classification, complete with: Partitioning walls, manufactured with high pressure laminated sheets, stainless steel, carbon steel, complete with coving and accessories when ...

Amcaremed Electrical Command and Control Panel is a highly integrated device for electrical control and monitoring in a variety of medical and industrial applications, protect medical gas equipment and systems. Product Detail Main ...

Operation theatre control panel is necessary to control, alarms and information in the modern hospital operating theater equipment. Product Detail The module is customization. Power: 220 V or 110 V with an emergency backup battery ...

The medical gas control panel is used in medical gas supply systems, providing pressure control of pipeline gas for surgical tools. Product Detail AmcareMed medical gas control panel has a pressure regulator in the center that allows ...

Capacity: 165, 105, 250 l
Temperature range: 121 °C - 134 °C

1. Compressed air free; 2. Versatile and simple operation; 3. High-visibility color touch screen interface; 4. Automatic command of cycles; 5. F0 control of sterilization cycle; 6. Validated cycles for hospital or laboratory loads; ...

Capacity: 625 l - 3,150 l
Temperature range: 121 °C - 134 °C

Integral steam jacket Easy to perceive and handle touch screen (Man-Machine interface) Computerized command of cycles Validated cycles for typical hospitalary loads Counting of sterilizations performed Real-time printing of cycle ...

Capacity: 80 l - 160 l
Temperature range: 121 °C - 134 °C

Uniclave 99 is ideal for the sterilization of open liquids with product probe, culture media, glassware and instruments, covering the needs of laboratory analyses and laboratory investigation. Features Easy to use and learn user ...

The MRI HYDROPROCESS kit is a system of fluid cooler to cool down the MRI scan system with automatic management of a city water back up that enables to maintain the cooling conditions. The MRI HYDROPROCESS kit is equipped with: A ...

Wall panels, completely inspectable without the need to disassemble other panels, thanks to the quick coupling system. Possibility of total configuration, depending on the design needs, to accommodate any outlet needed to operate in the ...

The CONF INDUSTRIES SCP is integrated into operating theatre by connecting to the available inputs and outputs of the monitored operating theatre systems (ventilation, medical gases system, insolation transformer). This is done with CONF ...

Capacity: 50 l - 169 l
Temperature range: 105 °C - 140 °C
Height: 1,110, 1,060 mm

The TLV-S Series vertical laboratory autoclaves are designed for the sterilization of both solid and liquid loads in the pharmaceutical and biotech industry. Fully automatic, equipped with cutting-edge engineering and exceptional quality ...

Capacity: 58 l - 169 l
Temperature range: 105 °C - 140 °C
Height: 1,310, 1,160, 1,110, 1,060 mm

Designed specifically for the pharmaceutical and biotech industries, the TLV-FA Series vertical autoclaves excel in sterilizing liquid loads thanks to their fast cooling system that includes pressure support. Up to 60% faster sterilization ...

Capacity: 50 l - 169 l
Temperature range: 105 °C - 140 °C
Height: 1,110, 1,060, 1,310 mm

Designed specifically for the pharmaceutical and biotech industries, the TLV-PD Series vertical autoclaves excel in sterilizing solid loads due to their super-drying system. Fully automatic, equipped with cutting-edge engineering and ...