- Furniture, Logistics >
- Logistics, Service, Storage >
- Other storage equipment
Other storage equipment

Volume: 10 l - 50 l
Height: 567 mm - 830 mm
Diameter: 300 mm - 462 mm
Static storage series is an economical small liquid nitrogen tank for laboratory use. It is specially designed for biological samples that need long-term static storage. It has two types of products: large capacity and longer storage ...
Infitek

Volume: 6, 10, 25, 3 l
Height: 120 mm
Diameter: 38, 97, 63 mm
Dry shipper series liquid nitrogen container is suitable for cryogenic environment (vapor storage at temperatures below -190 °C) transportation for samples. It could avoid the risk of the liquid nitrogen releasing during transportation, ...
Infitek

Volume: 10 l - 175 l
Height: 625 mm - 1,085 mm
Diameter: 300 mm - 681 mm
Laboratory series combines the advantages of low liquid nitrogen consumption and medium storage capacity. It has the advantages of light weight, less space occupation and high efficiency storage of large sample freezing. It can meet the ...
Infitek

BagRack allows the clean and orderly storage of bags during sample preparation. Available for bag sizes: 80 mL / 100 mL / 400 mL / 2000 mL / 3500 mL Autoclavable and stackable Clean and organized storage BagRack allows the clean ...

The BagRack Slide enables the organized, hygienic and fast storage of bags by sliding them to the side. It is ideal for sequential pipetting in addition to BagFilter Pipet & Roll bags. BagRack Slide is specifically suited for pathogen ...

Width: 347 mm
Volume: 1.04 l
Height: 430 mm
Freeze free High shock resistance Prolonged cold life for lengthy temperature-control transports Eco-friendly insulation for optimum protection against temperature excursions Optional temperature data logger for full traceability User-friendly ...
B Medical Systems

Width: 588 mm
Volume: 450, 270 ml
Height: 437 mm
High shock resistance Prolonged cold life for lengthy temperature-control transports Eco-friendly insulation for optimum protection against temperature excursions Optional temperature data logger for full traceability User-friendly ...
B Medical Systems

Width: 550 mm
Volume: 24 l
Height: 499 mm
Transport Systems for the safe transport of blood products. The model range MT consists of five passive transport systems and one active transport box, working with a compressor. B Medical Systems transport systems are ideal for intensive ...
B Medical Systems

Effective infusion care by securely hanging infusion bottles and bags safe use above and below light strips and care channels Technology All plastic parts are lightfast Stainless steel tubes according to DIN EN 10217-7 Material ...
provita medical

Economy Compact packaging allows for low-cost shipping Safety Closed with plugs - no risk of injury. Application optimal hygienic characteristics (wipe disinfection) Tube diameter:Ø 18 mm Total size:420 mm x 420 mm ...
provita medical

Angle of rotation:90° (fix) Type of Fixation:with medical wall rail clamp and support, for assembling onto wall rails 25×10 mm Extension length:appr. 1,800 / both sides with extension limit Inserted length - appr. 650 Total load capacity (kg):2
provita medical

Technical parameters ▪ Overall Dimensions 790W X 610D X 1000H mm ▪ Defibrillator Stand 380×340mm ▪ Work Board 340×250mm ▪ Cpr Board 475 × 595 × 8.5mm ▪ Packing Size 820X650x1150 mm ▪ Product Weight 65 Kg ▪ Caster 5"Two Casters ...
Jiangsu Saikang Medical Equipment

Technical parameters ▪ Overall dimensions 820W x 640D x 1080H mm ▪ Anesthesia rack size600*300*320mm ▪ Caster 5"two casters with brake, two without brake ▪ Work board 340*250mm ▪ Packing size 820x650x1150 mm ▪ Productweight 65 kg Technical ...
Jiangsu Saikang Medical Equipment

Technical parameters ▪ Overall Dimensions 820W X 640D X 1080H mm ▪ Caster 5"Two Casters With Brake, Two Without Brake ▪ Work Board 340*250mm ▪ Packing Size 820X650x1150 mm ▪ Product weight 65 Kg Technical configuration ☑ Drawer ...
Jiangsu Saikang Medical Equipment

Hospitality Service Cart MGE-TE21 The MGE-TE21 Hospitality Service Cart is expertly designed for efficient and quiet service operations in healthcare settings. Constructed from durable stainless steel, this cart ensures long-lasting ...
Medige International Industries

610*620*1250mm Tray Size: 503 * 460mm Adjustable tray spacing Color Options: Blue, red, or gray column Swivel Casters: Two with brakes for stability Power Socket Certification: CE, ISO The MGE-MT15 Endoscope Cart is a versatile ...
Medige International Industries

610*620*1350mm Tray Size: 503 * 460mm Adjustable tray spacing Color Options: Blue, red, or gray column Swivel Casters: Two with brakes for stability Power Socket Certification: CE, ISO The MGE-MT16 Endoscope Transport Cart is ...
Medige International Industries

Constructed with medical grade polymeric structure to provide maximum hygiene and easy cleaning Push bar Equipped with lockable functional drawers with key lock system Oxygen cylinder holder Rotatable defibrillator shelf Height adjustable ...
MESPA

Constructed with medical grade polymeric structure to provide maximum hygiene and easy cleaning Push bar Equipped with functional drawers with key lock system Lockable sharps container Glove box holder Transparent boxes Accessory ...
MESPA

Constructed with medical grade polymeric structure to provide maximum hygiene and easy cleaning Push bar Equipped with functional drawers with key lock system Separators for drawers Waste bin Lockable sharps container Glove box ...
MESPA

1. Specifications: 1050*635*1100mm 2. The main body is made of aluminum material, the bottom support is made of stainless steel, and the shell is made of PE polymer material. 3. the work table is made of high density PE polymer. 4. ...
Tianjin Kangli Medical Instrument

Width: 320 mm
Height: 1,500 mm
Length: 800 mm
2. the whole use of NATIONAL standard SUS304 stainless steel material, the main pipe specification is φ 25mm, wall thickness is not less than 1.5mm, 3. All parts of the overall welding process shall not appear welding leakage phenomenon, ...
Tianjin Kangli Medical Instrument

Width: 550 mm
Height: 2,000 mm
Length: 2,000 mm - 2,090 mm
the whole use of NATIONAL standard SUS304 stainless steel material, the main pipe specification is φ 25mm, wall thickness is not less than 1.5mm, plate thickness is not less than 1.2mm. 3. All parts of the overall welding process shall ...
Tianjin Kangli Medical Instrument

Practical doctor bag for easy transport of instruments and medications, provided with 8 internal movable divisions, 3 external pockets, 8 elasticated retaining, 1 internal pocket with zip, 1 removable mini bag (17 x 3 x h 24 cm). Size: ...
GIMA

Volume: 120, 60 ml
Graduated urine containers made in polypropylene with red screw cap and frosted label. Quantity: Box of 300 pcs.
GIMA

Size: 13x11x3.5 cm Available in any other language minimum 2,000 pcs (available in 90 days) 7 detachable 4-compartment boxes (morning, noon, evening, night) Size: 10.5x3.5xh 1.5 cm Technical Specifications Compartments: 28 ...
GIMA

Height: 185 cm
Length: 72 cm
Depth: 61 cm
DRS-OT10 is a cabinet in horizontal storage, to store and dry endoscopes and TEE probes. It allows the aseptic storage, up to 800 hours, up to 10 flexible endoscopes of any brand and model. As class I medical devices, it is designed ...
MDG Engineering S.r.l.

Height: 196 cm
Length: 100 cm
Width: 80 cm
Our cabinet range DRS-218™ to dry and store endoscopes is the complete and versatile solution for the proper aseptic conservation of instruments up to 800 hours, up to a maximum of 15 endoscopes of any brand and model. As class I medical ...
MDG Engineering S.r.l.

Height: 125 cm
Length: 205 cm
Depth: 70 cm
The horizontal cabinets DRS-215 line, designed to store and dry endoscopes and TEE probes, is the innovative and dynamic solution for the proper aseptic storage of instrument up to 800 hours, up to 10 flexible endoscopes and TEE probes ...
MDG Engineering S.r.l.

Number of hooks: 2 Centre distance: 420 mm Shelf holders : Stainless steel square tube 25 x 25 mm quality AISI 304 PVC taps at each side Set of 2 tubes Attaches to the rear of the bedpan washer
ARCANIA DEPARTMENT SOFINOR

L x P x H mm : 610 x 500 x 15 Drainage trays : Manufactured with stainless steel - quality AISI 304 For withal shelves with widths of 630 mm and 930 mm
ARCANIA DEPARTMENT SOFINOR

Stainless steel wire frame 5 mm quality AISI 304, Affix to wall Polished finish
ARCANIA DEPARTMENT SOFINOR

Height: 406 mm
Width: 506 mm
Depth: 242 mm
Keep your lab air fresh with 24/7 contaminate free air flow. ERLAB chemical storage cabinets provide outstanding filtration quality. We ensure users and laboratory technicians are protected against chemical hazards. Their technology ...
Erlab

Height: 685 mm
Width: 603 mm
Depth: 471.2 mm
Keep your lab air fresh with 24/7 contaminate free air flow. ERLAB chemical storage cabinets provide outstanding filtration quality. We ensure users and laboratory technicians are protected against chemical hazards. Their technology ...
Erlab

Height: 715 mm
Width: 654 mm
Depth: 583.6 mm
Keep your lab air fresh with 24/7 contaminate free air flow. ERLAB chemical storage cabinets provide outstanding filtration quality. We ensure users and laboratory technicians are protected against chemical hazards. Their technology ...
Erlab

Volume: 1 ml
Height: 11 cm
Diameter: 11.8 cm
Alcohol-free CoolCell 1ml FX Cell Freezing Containers for 12 x 1ml 96-format Sample Tubes ensure controlled-rate -1℃/minute cell freezing in a -80℃ freezer. No alcohol or fluids required Consistent heat removal through freezing ...
Azenta life sciences

The continuous evolutions in the field of professional furniture for the dental practice require a more open and dynamic vision: on the one hand to grasp and reinvent the most innovative design trends, on the other to obtain organizational ...
CATO

Height: 930 mm
Length: 2,120 mm
Width: 500 mm
For us at Cato, furniture for the dental practice has a starting point: the person. Always, at the center of all our creations, we put the professional with his work and his needs. We start from this perspective to create furniture for ...
CATO

Height: 850 mm
Length: 2,020 mm
Width: 500 mm
For us at Cato, furniture for the dental practice has a starting point: the person. Always, at the center of all our creations, we put the professional with his work and his needs. We start from this perspective to create furniture for ...
CATO

Machine table for CORiTEC one, CORiTEC 250i and CORiTEC 350i Specially developed for the requirements of the machine, the under-table has an attractive appearance and a stable design with sufficient floor space. The sturdy castors ...

Not just a drawer for trolleys, but a logistic medium at the heart of a whole system A trolley for hospitals, nursing homes or medical cabinets is usually equipped with drawers. At FH we made static drawers into active components of ...
Francehopital

Our emergency trolley in the medium size, with 400 mm drawers and 2 antistatic wheels. Features IV pole Left side: 2 tilt-out bins and pump compartment Right side: trash bin Back side: catheter holder & oxygen bottle holder Cardiac ...
Francehopital

Single laundry bag holder complete with hinged lid
Francehopital

Height: 600 mm
Width: 500, 600, 1,000, 1,200 mm
Wall cabinet with hinged doors and height-adjustable internal shelf
Nuova BN

Height: 600 mm
Width: 1,000, 1,200 mm
Wall cabinet with sliding doors and height-adjustable internal shelf
Nuova BN

Height: 600 mm
Width: 500, 600, 1,000, 1,200 mm
Open wall cabinet and height-adjustable internal shelf
Nuova BN

Width: 410 mm
Height: 810 mm
Depth: 450 mm
WC-303 is a shielded movable waste container are used for radioactive waste. It has been designed specifically to fit the standard blue plastic hospital containers. The containers are made of stainless steel. The plastic hospital ...
Comecer

Width: 410 mm
Height: 810 mm
Depth: 450 mm
WC-300 is a shielded movable waste container are used for radioactive waste. It has been designed specifically to fit the standard blue plastic hospital containers. The containers are made of stainless steel. The plastic hospital ...
Comecer

Perspex vial container for the shielding of beta radiation. The vial shield is polished on the inside to guarantee a clear view. Construction material - Perspex Thickness - 10 mm minimum Vial shield - Standard for 5 mm vials
Comecer

As professional manufacturer of different kinds of MRI room accessories and furniture, HHAO MEDI designed and produced this S.S MR trolley for 1.5T and 3.0T MRI room use. Certificate: MRI compatibility report ( 3.0 Tesla), CE (MDR ...

This MRI compatible oxygen cylinder holder is designed to match HO-M07 MRI oxygen cylinder ( 10L). It is made of non-magnetic material, which can be safely used in strong magnetic fild ( MR room) , MR compatible to 1.5T and 3.0T.

Drying and storage endoscopes is a very important part of the endoscope cleaning and disinfection process, which is directly related to the safety during endoscopy storage and the possibility of direct use, without the need for re-cleaning ...

Height: 1,400 mm
Length: 600 mm
Width: 300 mm
Black injected rubber armrest, with dimensions 350 x 120 mm. Removable and adjustable in all directions and height by means of a fixing knob. Base made of injected ABS. Structure made of chromed steel. Reinforced nylon base with ...
Hidemar

Height: 1,600 mm
Length: 1,000 mm
Width: 400 mm
Upper part with two hinged glass doors with metallic frame, with security keylock. Two adjustable glass shelves. Lower part with cupboard with two metallic hinged doors with security keylock. Fixed interior shelf. Manufactured in ...
Hidemar

SINGLE DOOR CABINET Door with lock and key. Four glass shelves. Glass doors. Made of enamelled steel. Dimensions: 600x350x1500 mm. Single door cabinet with locking mechanism on glass doors. Interior has four glass shelves body ...
Hidemar

Diameter: 105 mm - 460 mm
Need a a contamination-free loading and unloading of components in or out of the isolator? The beta transfer container is the ideal system for you! SIMPLE, SAFE AND CONTAMINATION FREE: THE CASTUS BETA CONTAINER 316L Perfect loading ...
castus GmbH & Co. KG

HOVI’S Home calls trolley This suitcase is equipped with a robust trolley structure that enable the user to move around with absolute comfort in the case of a home call. Made of grey bitone polyester with a electric blue lining combination, ...
ELITE BAGS

Multifuntional case with a very modern design. Its extreme lightness and resistance make it the perfect bag for diary work. Made of water-repellent bitone materials easy to clean, it combines design and versability, allowing it to hold ...
ELITE BAGS

This emergency case offers a versatile solution for organising supplies. Its design features adjustable internal dividers, allowing the fexlible arrangement of contents so they fit securely. The reflective stripe ensures visibility in ...
ELITE BAGS

The Aurion Unibody System trolleys are designed following the original concept of “monocoque”: the trolley and the drawers are moulded in a single piece of Baydur® Polyurethane, that assures peerless sturdiness and reliability, great ...

Volume: 500, 1, 3, 5, 10 ml
UltraSAFE buckets are special containers equipped with a unique one-way valve, specifically designed to prevent the escape of formalin fumes during operation and to dispense formalin using UltraSAFE’s automatic injection nozzle. An additional ...

Volume: 60 ml
FormSAFE provides an excellent alternative to traditional prefilled containers when personnel are concerned with formalin exposure during collection, transport and storage. A second stratified fluid component floats above the formalin ...
Your suggestions for improvement:
Subscribe to our newsletter
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining