Other pharmaceutical equipment

Speed: 0 rpm - 16,000 rpm
RCF max (g): 21,695 unit
Noise level: 65 dB

Centrifuge is a special equipment for rapid separation, concentration and purification of mixed substances with different sedimentation coefficients through centrifugal force generated by high-speed rotation. It is widely used in medical ...

Speed: 6,000 rpm
RCF max (g): 5,290 unit
Noise level: 65 dB

The instrument has been widely applies to the experiments in fields of clinical, biology, genetic engineering, immunology, Which applies to isolation radio-immunity, water treatment, biology, chemistry, bio-pharmaceutical and blood. Features: 1. ...

It is suitable for the viscosity and property testing of edible gelatin, medicinal gelatin, industrial gelatin, bone gelatin and other gelatin, as well as the viscosity detection of agar, protein powder and other gelatin liquids. Features: * ...

Magnification: 4 unit - 100 unit
Weight: 34.6, 35.3 kg

The APEXVIEW APX100 all-in-one microscope makes it fast and simple to acquire expert-quality microscope images. Built with renowned Olympus optics, an intuitive user interface, a powerful AI, and a suite of smart features, the APX100 ...

The Personal AUtomated Lab Assistant PAULA helps you to speed up your daily cell culture tasks and standardize the results to improve your downstream workflow, offering you essential analysis apps like confluence check. It is small enough ...

The TS2-40 Stericlean robot is designed to meet the stringent requirements of hydrogen peroxide (H₂O₂) decontamination process. It can operate in a Grade A environment for various applications in laboratory, batch testing or pharmaceutical ...

The TS2-60 Stericlean robot is designed to meet the stringent requirements of hydrogen peroxide (H₂O₂) decontamination process. It can operate in a Grade A/B environment for various applications in laboratory, batch testing or pharmaceutical ...

The TS2-80 Stericlean robot is designed to meet the stringent requirements of hydrogen peroxide (H₂O₂) decontamination process. It can operate in a Grade A/B environment for various applications in laboratory, batch testing or pharmaceutical ...

Capacity: 70 l - 1,580 l
Temperature range: 140 °C
Width: 730, 830, 970, 1,290 mm

The Systec H-Series floor-standing autoclaves of the performance category HX can be used for all laboratory applications, even for sophisticated sterilization processes and are available in 16 different sizes with 65 to 1580 liters chamber ...

Capacity: 90 l - 1,665 l
Temperature range: 140 °C

The new generation Systec H-Series 2D double-door/pass-through autoclaves of the performance category HX can be used for all laboratory applications, even for sophisticated sterilization processes and are available in 13 different sizes ...

Capacity: 40 l - 166 l
Temperature range: 140 °C
Width: 500, 550, 650 mm

The Systec V-Series of top-loading vertical autoclaves in 8 different sizes with 40 to 150 liters chamber volume is distinguished by its small footprint and high chamber capacity. Result: optimal loading capacity with most standard media ...

Tianlong Panall 8000 is an open system that enables laboratories to program user-defined PCR analysis protocols. Laboratories can use user-defined protocols in addition to those developed by Tianlong. The simple and efficient design of ...

Capacity: 50 l - 169 l
Temperature range: 105 °C - 140 °C
Height: 1,110, 1,060 mm

The TLV-S Series vertical laboratory autoclaves are designed for the sterilization of both solid and liquid loads in the pharmaceutical and biotech industry. Fully automatic, equipped with cutting-edge engineering and exceptional quality ...

Capacity: 58 l - 169 l
Temperature range: 105 °C - 140 °C
Height: 1,310, 1,160, 1,110, 1,060 mm

Designed specifically for the pharmaceutical and biotech industries, the TLV-FA Series vertical autoclaves excel in sterilizing liquid loads thanks to their fast cooling system that includes pressure support. Up to 60% faster sterilization ...

Capacity: 50 l - 169 l
Temperature range: 105 °C - 140 °C
Height: 1,110, 1,060, 1,310 mm

Designed specifically for the pharmaceutical and biotech industries, the TLV-PD Series vertical autoclaves excel in sterilizing solid loads due to their super-drying system. Fully automatic, equipped with cutting-edge engineering and ...

Speed: 200 rpm - 10,500 rpm
RCF max (g): 16,022 unit
Weight: 157, 190 kg

The ZK 496 is a large volume floor-standing centrifuge, which is also available as a space - saving underbench model. Both models are provided with a powerful cooling system to keep your samples cool. Its huge volume allows a large ...

Speed: 100 rpm - 4,200 rpm
RCF max (g): 3,160, 560 unit
Weight: 56 kg

Laboratory bench-top centrifuge with refrigeration LMC-4200R provides temperature control of biomaterial during centrifugation. Temperature control of the so-called “cold-shelf” is a gold standard for enzymologists and cell biologists ...

Capacity: 4 l
Temperature range: 25 °C - 100 °C
Weight: 3.4 kg

Water bath-thermostat WB-4MS is designed for chemical, pharmaceutical, medical and biological laboratory research. WB-4MS provides increased temperature stabilization (up to 0.1°C) due to built-in magnetic stirrer (regulated speed ...

The CR-GL 265 is suitable for contamination-free use in highly sensitive manufacturing processes. Contamination-free filter changes up to ISO Class 5 (DIN EN ISO 14646-1) make the systems suitable for air filtration in cleanroom cabins ...

The GL 230 is ideal for noise-sensitive environments such as laboratories and practice rooms. It is an environmentally friendly, energy-saving and quiet extraction system. Product variants Filter configuration: Pre-filter mat ...

The GL 265 is suitable to use in noise-sensitive environments such as medical practices or laboratories. The extraction system is environmentally friendly, quiet and energy-saving compared to equivalent extraction systems. Technical ...

The linear vibrator is used to convey tablets and capsules horizontally from one point to another. Key benefits Compatible with the deduster/polisher Available in 3 lenghts: 800, 1000, 1200 mm Easy to clean Easy to disassemble Compact ...

The intelligent diffractometer With the 3rd generation Empyrean, Malvern Panalytical has now redefined the concept of a multipurpose diffractometer: our newly designed MultiCore Optics enable the largest variety of measurements without ...

Meet Aeris – our brand-new X-ray benchtop diffractometer. Aeris will impress you with data quality and speed of data acquisition so far only seen on full-power systems. The instrument is accessible for everyone with its built-in touch ...

Fully automated, hands free ITC for increased productivity The MicroCal PEAQ-ITC Automated is a configurable, low volume, highly sensitive isothermal titration calorimeter which offers the convenience of unattended operation. It delivers ...

Capacity: 50, 75, 35, 100 l
Temperature range: 116 °C - 134 °C
Sterilization cycle time: 4 min - 120 min

Hand wheel translation and quick opening structure Internal steam cycle High quality stainless steel material With drying function Microcomputer automatic control,arbitrary setting sterilization parameters Safety interlocking device Digital ...

CRP Compact is a system for the automatic dispensing of radiopharmaceuticals and the automated latching of open and closed vials under sterile conditions, compliant with EU GMP Annex 1 regulations. Safe, compact, and extremely precise, ...

AseptiFill is the Aseptic Filling and Capping Machine specifically designed for Pharma & Biotech companies, focused on small batch production of injectable products for pre-clinical and clinical trial studies. Suitable for Ready-To-Use ...

depyrogenation tunnel guarantees the continuous sterilization and depyrogenation of glass containers such as vials, type R or type H, by means of filtered high temperature air (max 350°C) in laminar flow conditions. The air laps vertically ...

Capacity: 521, 708 l
Width: 1,600 mm
Height: 1,898 mm

The main difference between the Ventilab® PL and the Vakulab® PL is the taller chamber that allows a fan to be built in without reducing the chamber volume. In addition, all of the equipment components necessary for sterilizing liquids ...

Capacity: 460, 644 l
Width: 1,900 mm
Height: 1,918 mm

The hygienic design and customer-specific special features of the Vakulab® HL handle the demanding tasks involved in the production of sterile materials, such as solutions or filled syringes, as well as those encountered in production-related ...

Capacity: 644, 871, 1,267 l
Width: 1,900 mm
Height: 1,918 mm

Perfected for the use of the hot water cascading method, the Fluipharm® offers everything necessary for research and development, the production of sterile materials and, last but not least, the treatment of parenteral solutions in hospital ...

Speed: 200 rpm - 14,800 rpm
RCF max (g): 16,163 unit
Noise level: 54 dB

The compact Sigma 1‑14 centrifuge fits in every lab and fulfils the most stringent technical requirements. Its strong performance and large range of rotors are unique: Thanks to rotors for PCR strips, microhaematocrit capillary tubes ...

Speed: 200 rpm - 15,000 rpm
RCF max (g): 16,602 unit
Noise level: 50, 49 dB

The Sigma 1‑14K centrifuge has a small footprint, fits in every lab, and fulfils the most stringent technical requirements. Its strong performance and large range of rotors are unique: Thanks to rotors for PCR strips, microhaematocrit ...

Speed: 200 rpm - 14,800 rpm
RCF max (g): 16,163 unit
Noise level: 15, 12, 54 dB

Powerful and versatile! Supports the fight against breast cancer. The compact Sigma 1‑14 centrifuge fits in every lab and fulfils the most stringent technical requirements. Its strong performance and large range of rotors are unique. The ...

The most powerful technology in the world is even better suited to your laboratory. Popular with the most advanced laboratories, fume hoods fitted with new GreenFumeHood 3 filtration rival classic fume extraction hoods for effectiveness. They ...

KOMPACTOR 200 is a roller compactor for powder granulation. Due to its in-line production concept, it is designed for a great variability of batches, from 10 to 200 kg/hour. In the product input hopper, there is an extrusion forcer designed ...

Built under GMP standards in different grades of stainless steel (AISI 304-316-316L), each tank can be pressurized and vacuum as required. In this way, they can be heated or cooled, by means of coils, jackets or internal half-round ...

Support tubing durometer up to 85 Shore A and 75 PSI/5.2 bar media pressure Offer reliability and performance when working with larger diameter or hard tubing that requires stronger pinch forces Flexible tubing sizes from 0.094” to ...

Complete System Features: – Provides a robust solution for accurate closed loop proportional control and precision fluid management – Dependable, compact and cost-effective solution – Pinch head designed for wash down and clean rooms – ...

The Acro Versagrip™ solenoid pinch valve product line offers flexibility and affordability from a wide selection of models and configurations. Technical Information Standard 24VDC x 3A power input Supports up to 60 Shore A average ...