- Laboratory >
- Physico-chemical analysis >
- Other physico-chemical analysis devices
Other physico-chemical analysis devices

AGSS probe venturi model complies with ISO 9170-2 (1L) standard. Suitable for AGSS terminal unit based on venturi system

Sink temperature probe 2 Meter Cable Digital Screen

Weighing capacity: 12 lb
Readability: 0.1 oz
Width: 34.5 cm
DETECTO’s WPS12UT digital scale with utility bowl is IP67-rated for water protection and can be completely submersed underwater for easy clean up that is necessary in clinical industry applications. This stainless steel scale is ideal ...

Weighing capacity: 5,500 g
Readability: 1 g
Width: 190.5, 228.6 mm
DETECTO’s stainless steel model WPS12DT Mariner® Wet Diaper Scale can be completely submerged underwater for easy wash-down cleaning that is necessary in any hygienic medical environment. The scale features six different capacities, including ...

Weighing capacity: 4,000 g
Readability: 1 g
Width: 7.5, 152 in
Detecto packs a lot into its compact wet diaper/lap sponge scale, designed to answer your every need in measuring fluid output. Stainless steel construction makes the removable tray, measuring 9 L x 6 W x 2 H inch (229 L x 152 W x 51 ...

Densitometer is designed for measurement of cell suspension's turbidity in the range of 0.0–6.0 McFarland units (0 – 180 × 10^7 cells/ml). Densitometer provides the opportunity to measure solution turbidity in a wider range (up to ...

Densitometer is designed for measurement of cell suspension's turbidity in the range of 0.0–6.0 McFarland units (0 – 180×107 cells/ml). Densitometers provide the opportunity to measure solution turbidity in a wider range (up to 15.0 ...

Output: 300 l/min
Pressure: 250 mbar
Weight: 350 g
- High accuracy - Very low resistance - Flow measurement under high pressure - Robust The FlowMeter F2 measures gas flow, volume, absolute pressure, differential pressure, temperature and humidity. Easy to use, battery powered, ...

Output: 300 l/min
Pressure: 0.5 bar - 2 bar
Weight: 350 g
- High accuracy - Very low resistance - Flow measurement under high pressure - Robust The FloTest measures gas flow, volume, absolute pressure, differential pressure and temperature. Easy to use, battery powered, compact and ...

Our sterile temperature probes offer accuracy and convenience. The esophageal/rectal probes are designed for adults, pediatrics and infants/newborns in surgery/critical care units, and long-term temperature applications on medical/surgical ...

Fast & accurate way to determine tapped density for capsule filling. Eliminates calculation errors as volume is 1ml. Most manufacturers do not provide tapped density or provide it using 100 or more taps, which does not correlate to capsule ...

The DO-LITE dissolved oxygen measuring instrument adopts advanced optical fiber fluorescence quenching measurement technology, which has high sensitivity and fast response speed. The measurement process itself does not consume oxygen, ...

The Shake Flask Reader (SFR) is an online measurement that determines valuable parameters such as dissolved oxygen and pH in shake flasks. Performance characteristics Rapid, parallel online monitoring of up to 9 shake flasks ...

Height: 16, 266 cm
Width: 3, 32 cm
Used for flow measurements in the lab, process flows in pilot plants, metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes and for indicating flow rates in pumping or flow systems. Formed ...

The VICTOR2™ D fluorometer is designed for all Revvity diagnostic and screening assays based on either time-resolved fluorescence or prompt fluorescence. Overview The VICTOR2 D fluorometer forms part of the semi-automatic DELFIA ...

The Artema OXIMA™ is a galvanic sensor for the measurement of oxygen content in breathing gas mixtures. The patented design of the Artema OXIMA™ ensures fast response oxygen measurement, with easy sensor exchange through an user accessible ...

Easy, intuitive controls Ready to use with QuantiFluor® Dyes Recommended for next-generation sequencing Bundled package available for integrated instrumentation and assay Highly sensitive, affordable, single-tube fluorometer The ...

The accessory enthalpy switch/receiver measures both temperature and humidity and converts the data into a relay output dependent on the sensor mode. Mode 1 is designed to energize the relay at a fixed set point of 28 BTU/lb or 75 F. Features Advanced ...

Reflective backing reflects operating room lighting and insulates sensor from heat created by overhead lamps. Soft, flexible foam with hypoallergenic adhesive allows for easy placement and removal. Thermistor is embedded into foam ...

Benchtop Density Meter LBDM-A10 is capable of measuring the density within a range of 0 g/cm³ to 3 g/cm³. It can also measure alcohol concentration and custom formula. It operates in the principle of U-tube oscillation. This method combines ...

Invest in a quality stainless steel consulting/exam table from Burtons that will last a lifetime, retain its looks, and impress your clients. Available in rigid or mobile versions A simple consult table that will last a lifetime, retain ...

Weighing capacity: 5,000 g
Readability: 1 g
Features & Benefits Stainless Steel Base and Weighing Surface The stainless steel design is easy to clean and ideal for sterile environments. Rechargeable Battery Power Source Scale is powered by a 6V rechargeable battery with battery ...

Laboratory-style finger contoured Ag-AgCl Electrodes is a good choice for examiners to use when EDA signals are not optimal by traditional plates. Requires skin conductance electrode paste.

Densi-La-Meter II is an easy-to-use optical device specially designed for comfortable and rapid determination of microbial density. Definition of microbial concentration is a very important initial standardizing step in microbial identification, ...

Scanion is designed for electropherogram analysis and measurements on transparent and translucent supports. This semi-automatic densemeter combines high accuracy and reliability with technological features. Scanion reads both stained ...

Probe type AFNOR NF-S 90-116 with thread ISO G. 1/4” F.

SPECIAL PS MACRO PHOTOMETER CUVETTE,4 ML Volume ml - 2 - 4 dimensions mm - 10x10x45 type - macro unit of measurement - NR box quantity - 1000 weight box kgs - ...

ANTECH CryoMonitor 1000 is real-time temperature display. Even liquid level sensor fail, user could know low LN2 level from temperature increase. When temperature exceed the setting temperature, it will alarm. Antech Smart Cap realizes ...

Fully-automatic system for the determination of the equilibrium boiling point of engine coolants conforming to ASTM D1120 and brake fluids according to SAE-J1704 and other standards. The system is designed for fully-automatic operation ...
Pilodist
Your suggestions for improvement:
Subscribe to our newsletter
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining