Other sample handling equipment

Speed: 9,200, 6,000 rpm
RCF max (g): 2,000, 5,000 unit

Very quiet operation LED light for visual operation control Small foot-print takes up less bench space Fast stop when opening All rotors and adapters included Easy rotor Change Personal micro-centrifuge The BioTool ...

The device isdesigned for thawing out and warming plasma, blood and stem cells. The deviceperforms melting process with the watery system. The waterfillable chamber offers a capacity of 15lt. Themicroprocessor enables a safe and ...

Weight: 230 g
Length: 95 mm
Width: 38 mm

Portable and lightweight, its ergonomic handle is connected to powerful rechargeable battery pack. Main features Ergonomic Grip, Spalsh guard HemoWeld Battery™ is equipped with an ergonomic grip and an integrated splash-guard. The ...

Content 50 ml Content 100 ml Content 250 ml Content 500 ml Content 1000 ml Content 2000 ml NS lid plug: 19/26 Tap hole: 2,5mm Content: 50 ml Description Interchangeable chicks with reliable tap locks Interchangeable ...

Content 50 ml Content 100 ml Content 250 ml Content 500 ml Content 1000 ml Content 2000 ml NS lid plug: 19/26 Tap hole: 2,5mm Content: 50 ml Description Interchangeable chicks with reliable tap locks Interchangeable ...

approx. 4 cm Ø approx. 5 cm Ø approx. 6 cm Ø approx. 8 cm Ø approx. 10 cm Ø approx. 12 cm Ø approx. 16 cm Ø Handle Ø: approx. 14 mm Stem length: approx. 18 mm Ø: approx. 40 mm Height: about 45 mm Description with ...

Color: White Length: 32" Texture: Smooth finish Cuff: Beaded, Rolled Cuff Other: Anti-Static, Chemical Resistant, Resist Ozone, Compatible with VHP, Resist 9 Chemo Drugs Hand Size 11" Men Diameter Port Size 6" Diameter ...

Cooling elements for the transport of thermosensitive products such as biological samples, blood components, drugs and vaccines. Made of white or blue HDPE, these plates contain a mixture of water and salts. The plates must be kept ...

Cooling elements for the transport of thermosensitive products such as biological samples, blood components, drugs and vaccines. Made of white or blue HDPE, these plates contain a mixture of water and salts. The plates must be kept ...

Cooling elements for the transport of thermosensitive products such as biological samples, blood components, drugs and vaccines. Made of white or blue HDPE, these plates contain a mixture of water and salts. The plates must be kept ...

Desiccator,With porcelain plate I.D.(mm) 120 150 180 210 240 300 350 400 total heigh (mm) 220 260 275 325 355 400 460 Height of plate(mm) 110 135 160 180 210 235 255 300

Desiccator amber,With porcelain plate I.D.(mm) - 120 - 150 - - 180 - - 210 - - ...

Vacuum Desiccator, Amber,with ground-in stopcock and porcelain plate

100% Nitrile Examination Gloves EN455, EN374, Virus, EN420, LFGB, FDA510K 100pcs per dispenser Medical examination glove, powder free, latex free. Size: S, M, L, XL MOQ: 10000 boxes Lead time: 30 days Resistant to punctures, ...

Sealing temperature: 80 °C - 200 °C

•using automatic microcomputer control, precise temperature control, the cooling temperature at 60 ~ 120 *C arbitrary choice, with automatic lamination System, adjustable clamping force; •with the way the heating puise heating, heating ...

Speed: 0 rpm - 7,000 rpm
RCF max (g): 2,680 unit
Weight: 0.5 kg

Space- and energy-saving micro centrifuge with adequate power for routine centrifugations. lid must be closed for operation mode safety: the lid can only be opened when the rotor is not rotating rapid start and stop within ...

For customizing the white Cryo Boxes, the Rainbow Cryo labels are available in colors: red, yellow, green, blue and purple. temperature-resistant down to –150 °C 50 labels per pack, divided into 5 colors, 10 pieces of each color

Capacity: 105 l
Temperature range: 2 °C - 8 °C
Height: 837 mm

High performance ventilated cooling Stable and homogeneous temperature between 2 ° and 8 ° C at any point of the working volume Audible alarm when temperature thresholds are exceeded Electronic thermostat for optimal ...

Capacity: 351 l
Temperature range: 2 °C - 8 °C
Height: 1,850 mm

• High performance ventilated cooling • Stable and homogeneous temperature between 2 ° and 8 ° C at any point of the working volume • Dixell electronic thermostat for optimal cooling control • Automatic and permanent defrost • Anti-freeze ...

Capacity: 351 l
Temperature range: 2 °C - 8 °C
Height: 1,850 mm

• High performance ventilated cooling • Stable and homogeneous temperature between 2 ° and 8 ° C at any point of the working volume • Dixell electronic thermostat for optimal cooling control • Automatic and permanent defrost • Anti-freeze ...

Universal trays The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple. Special ...

The clamps are riveted onto these trays and cannot be removed. They offer maximum stability and will often hold a larger number of flasks than universal trays. These trays come in four sizes (E, EX, F and C), each available in a variety ...

Kuhner has designed trays specifically for microtiter plates. Handles at the front of the tray open and close the special clamping mechanism allowing plates to be loaded and unloaded. Trays of different heights (22, 47 and 77mm) allow ...

This cooler safely holds thirty-two 0.5, 1.5 or 2.0ml microcentrifuge tubes or cryogenic vials at a temperature below -15ºC for approximately 1½ hours. Use included insert to hold 0.5ml microcentrifuge tubes. Store at -20ºC for 24 hours ...

Benchtop sized cooler holds twelve 15ml centrifuge or cryo vials at a temperature below 0ºC for approximately 3 hours. Store at -20ºC for a few hours until the temperature of the cooler falls below 0ºC. Tubes up to 125mm tall can be ...

Benchtop sized cooler holds thirty-two 0.5 or 1.5ml microcentrifuge tubes at a temperature below 0ºC for approximately 3 hours. Use included insert to hold 0.5ml microcentrifuge tubes. Store at -20ºC for a few hours until the temperature ...

Temperature range: -25 °C - -15 °C
Height: 860 mm
Depth: 500 mm

New energy efficient and environmental friendly MEDLAB SAVE range is designed and manufactured for the exacting standards of Biological, Pharmaceutical, Life Sciences and laboratories. Fan assisted air distribution ensures accurate product ...

Speed: 12,000 rpm
RCF max (g): 6,900 unit

Includes 12-place microhematocrit rotor and 6-place microtube rotor Digital speed and time for accurate results Small footprint and quiet operation

Documentation system for blood banks Transparency and Traceability HettInfo II documents important work steps before and during centrifugation – this ensures transparency and traceable processes. The documentation system is operated ...

Save your digital slides in one central location Organise cases with barcodes and configurable access rights Share digitized slides with your colleagues – anytime, anywhere CaseCenter is the web-based database for your digitized ...

Economical throwaway latex-free gloves are ideal for laboratory work in biology and chemistry. Dispenser box of 100 PPE gloves makes sure gloves are always available, just like tissues. More Information Item Weight - 0.31 lbs

Speed: 200 rpm - 15,000 rpm
RCF max (g): 21,380 unit
Noise level: 56 dB

The new refrigerated high speed Micro centrifuge CD-3124R has a capacity of 24 x 2 ml, 18 x 5 ml or 36 x 0.5 ml. Easy handling and control is guaranteed with the backlit LCD-Display and the clear operation panel. For safety reasons ...

Palm thickness 0.07mm (3 mil), weight : 3.5g size M Tested to ASTM D5526 (determine the degree and rate of anaerobic biodegradation of materials in accelerated landfill conditions). Results: 30% biodegradation after 202 days Tested ...

Blood Thaw Machine LBTM-A10 can accommodate up to 6 blood bags with 50 to 200 ml capacity. This machine is constructed with 304 stainless steel with a spacious chamber volume of 20 L. Incorporated with a decomposable water tank with an ...

Speed: 200 rpm - 15,000 rpm
RCF max (g): 21,380 unit
Weight: 12 kg

Ideal for high-end research applications, the Medline MD3024R 15,000rpm High Speed Refrigerated Microcentrifuge can be used in physical and chemical analysis, biochemistry, cellular and molecular biology, clinical laboratories and blood ...

SorbStar is the new sachet and canister desiccant inserter designed by Capmatic. The frame of the SorbStar is made of anodized aluminum with a stainless steel exterior. The electrical and mechanical parts are located inside the frame ...

TRO-SENSOSOFT examination gloves are prepowdered, ambidextrous and non sterile. They are seamlessly manufactured from latex or vinyl material, which makes them extremely resistant and gives them highest tensile strength. Their excellent ...