Bone plates

Thickness: 1.8 mm
Number of holes: 3, 4, 5, 1, 2 unit

PLATES FOR ANTERIOR CERVICAL ARTHRODESIS The PM BUTTERFLY® system is intended to provide osteosynthesis between two or more cervical vertebrae thanks to a plate and cervical screws. - ANTERIOR APPROACH - ...

Length: 19, 100 mm
Number of holes: 4, 10, 6, 8 unit

... and dynamic fixation Combination use of fixed angle screw and variable angle screw Patients with different physique and bone changes, single level and multiple level operation

... the optimal balance between strength, profile and construct rigidity. Its specialized instrumentation combined with unique plate features make Admiral ACP an efficient and reproducible ACDF solution. KEY FEATURES No ...

Length: 54, 180 mm
Hole diameter: 2.7, 3.5 mm
Number of holes: 3, 13 unit

TITANIUM HI DISTAL RADIUS PLATE - 2.7 / 3.5 mm - RIGHT 2347-003 3 Holes 54 mm 2347-004 4 Holes 62 mm 2347-005 5 Holes 70 mm TITANIUM HI DISTAL RADIUS PLATE - 2.7 / 3.5 mm - LEFT 2348-003 3 ...

Length: 90, 210, 126, 138, 114 mm
Thickness: 3 mm
Number of holes: 4, 5, 10, 6, 13 unit

... including one elongated hole that helps in plate positioning In the long plate distal shaft consists of 7-13 elongated combi holes Plates can be used with the LISS Plate ...

... Superior, and Anterior Plates. 2.7 mm Locking/Non-Locking Screws, 3.5 mm Locking/Non-Locking screws, 4.0 Cancellous Lag Screw. The Midshaft Superior Plates are designed with divergent screw angle trajectories ...

Length: 60, 69, 77, 86, 94 mm
Thickness: 2.2 mm
Number of holes: 3, 4, 5, 6, 7 unit

Screws offer a locked construct to support the articular surface and reduce the need for bone graft Variable angle locking Holes allow up to 15° off-axis screw angulation in all directions in order to address the ...

... Mandible Reconstruction Plate With Anatomical Plates The device is designed and manufactured using the symmetry of the healthy side to suit the patient anatomy. The mandibular reconstruction may be performed ...

... metatarsophalangeal joint. The NeoFit® MTP arthrodesis plate is manufactured in Ti6Al4V titanium alloy. - The NeoFit® plate is available in four sizes for the right side and in four sizes for the left ...

Length: 6 mm
Number of holes: 2, 8 unit

Aconda is an anatomie and dynamic plate for fixation of proximal femur having five modules to fix proximal femur. The system has normalcutl and smallcut models having locking and dynamic models. The material is MRI friendly ...

957-357-32060 957-257-32060 14×60×L 957-357-32070 957-257-32070 14×70×L 957-357-32160 957-257-32160 14×60×R 957-357-32170 957-257-32170 14×70×R

Length: 180, 220, 54, 120 mm
Thickness: 1.8, 1 mm
Hole diameter: 2.5, 5, 1.2 mm

Volar distal radius plate with TIC™ (Titanium Inlay Clip) Technology for polyaxial screw locking, indicated for the treatment of distal radius fractures including styloid fractures.

Number of holes: 6, 7 unit

Anatomical profile plate, with compression and locking holes. Features specific profiles for left and right member. – Low Profile; – Low contact; – Tapered tip; – Mask in peek with carbon fiber; – Color system; – ...

Length: 20, 81 mm

1.Low profile, super bonegraft window. 2.Round edge, reducing tissues stimulation. 3.Anatomically prebending desin. 4.Midcourt line sunken design, easy for location. 5.Anti-recess. 6.Simple, effectively anti-pullout of screw.

- Optimal Fit - Screw Trajectory - Fully Instrumented System - Pre-contoured Plates

Volar Distal Radius Plating System The GEMINUS ® Volar Distal Radius Plating System features a unique dual head design that improves fit to the volar radial surface, minimizing the potential for flexor tendon injuries while providing ...

Length: 70, 100, 115, 85 mm
Thickness: 3.5 mm
Hole diameter: 4.1 mm

... shaped plates provide fixation for lateral clavicle fractures with xloc locking screws to lock the plate and to build a fixed-angle construct. FEATURES Anodized type II Reduced risk of cold welding Good ...

Plates fixate fractures of short bones or long (tub) bones, they are for corrections and bone stabilisation. Fixation of the plate on the bone ...

... Multiple bone screw option of the anatomic plates provide to fix the multifragmentary fractures easily and correctly. For easy recognition, all the anatomic shaped Left plates are colored ...

CUBOID foot locking plate, slim Polyaxial locking plate for osteotomies and for treatment of fractures of the cuboid bone Indications Fractures of the cuboid bone Corrective ...

Features: Surgical decompression with or without fusion is the surgical treatment for patients with moderate to severe lumbar spinal stenosis. Lumbar interspinous process decompression (IPD), also known as interspinous distraction or ...

Indikation: For fractures of the distal or proximal phalanx.

... holes allowing reduction and stabilization of the Wagstaff fragment/AITFL to the plate • Anatomic medial malleolar plate o Patent-pending design (US29/719,840) o Specifically designed to allow buttress ...

Length: 250 mm

The INTEGRA™ stainless steel plate, combined with 3 cerclage wires, ensures a solid osteosynthesis of the trochanteric flap during total hip revisions. The plate reinforces the fragile bone ...

Length: 99.5, 75.5 mm
Thickness: 1.2 mm
Number of holes: 6, 8 unit

WishBone Medical Straight Fibula Plates are used for pediatric and adult patients as indicated for small and long bone fracture fixation and fixation of bones that have been surgically ...