Cementless femoral stems

... biologic fixation and increasing rotational stability. Stability PROVEN METAPHYSEAL INTEGRATION The proximal design of the stem in the shape of a three-dimensional taper leads to partial filling of the metaphysis ...

Femoral stem length: 115, 150 mm
CCD angle: 135 °

Material: L Wrought titanium Ti6Al4V alloy (ISO 5832-3)

CCD angle: 120 °

... Hype® range of femoral stem is a complete range of self locking stems dedicated to primary total hip arthroplasty. CHARACTERISTICS AND MATERIALS Characteristics : Homothetic size ...

Femoral stem length: 160, 95 mm

The Entrada Hip Stem integrates a wealth of clinical history—hydroxyapatite coating, compaction broaching, taper wedge geometry—and provides critical refinements—progressive neck lengths, consistent proximal body growth, ...

The Securus® Revision Stem System, based on the proven Furlong® fully hydroxyapatite ceramic coated (H-A.C.) stem design, with its full interchangeability between proximal bodies and distal stems, ...

CCD angle: 135 °

CINEOS® prostheses consist of femoral stems designed for the replacement of the natural hip joint during first intention or during revision surgery. 10 sizes 12/14 taper Without collar Forged Titanium ...

Femoral stem length: 6.25, 20 mm

The concept of this femoral component relies on a dose prosthesis-bone contact in both medial and lateral zones. The stem geometry shows a proximal to distal 3 degree taper providing a greater femoral ...

Femoral head diameter: 22.2 mm - 36 mm
CCD angle: 130, 122 °

... to choose between a standard stem (130° neck-shaft angle) and a lateralised stem (122° neck-shaft angle) during the preoperative planning phase or during the procedure itself. Features and materials ...

Femoral stem length: 305, 265, 225, 190 mm
Femoral stem offset: 41.5 mm
Femoral head diameter: 14 mm - 25 mm

Indicated for partial or total uncemented revision hip arthroplasty. The Vegamaxx nail follows a cylindrical and wedge-shaped profile, its fixation is carried out in the distal portion of the femur. – Anatomical design, with smooth ...

... stability of the prosthesis, anti-rotation; 3. Microporous titanium coating: Provide good pore space for bone ingrowth; 4. Short stem design: Maximize bone remain and leave bone for revision; 5. Curved distal end patented ...

Femoral stem length: 320 mm
CCD angle: 128, 135 °

... load axis choice of 4 surface finish (with and without cement) choice of 2 stem lengths in primary cementless stems: normal or -15mm (on average) revision cementless ...

CCD angle: 135, 125 °

The KORUS System was created with the aim of providing the surgeon with comprehensive and reliable solutions for an increasingly personalized surgical procedure. Vertical and horizontal grooves: increase the contact surface and ensure ...

The titanium alloy TARGOS™ Mini self-locking femoral stem with collar is intended for cementless implants. It controls the sinking and preserves the spongy hip bone structure. This ...

Femoral stem length: 137, 177 mm
Femoral stem offset: 37.4, 46.9 mm
CCD angle: 132 °

... Proximally tapered stem geometry converts the shear forces to compressive load. • This helps the stem to resist subsidence and medial migration. Extensive Stress Distribution • Low elastic modulus ...

Femoral stem length: 3, 10 mm

Heads connect through 12/14 Eurocone to the stems, sizes are in 28 mm and large ones are also available. Raw material is CoCr or ceramics

... Titanium alloy •Proximal 1/2 Proven Ti-plasma spray porous coating •Patented neck shape to increase ROM •Proximally tapered stem geometry converts the shear forces to compressive load. •Wide Offset Distribution ...

Femoral stem length: 29, 40 mm
CCD angle: 130 °

Shortened straight stem Titanium + HAP bilayer coating Standard or lateralized neck