Dental prosthesis dental materials

Flexural strength: 90 MPa

... component micro fine hybrid composite for the adhesive luting of composite and ceramic restorations. Indications Permanent cementation of endodontic posts made of metal, reinforced composite Permanent ...

Size: 98 mm
Flexural strength: 1,300 MPa - 1,450 MPa

The blanks impress with their strength and their hydrothermal long-term resistance. A completely homogeneous joint is produced by using a specially developed manufacturing process. The balanced composition and fine grain structure ...

... of fit and attractive translucency. Indications Indicated for individual or splinted crowns & bridges up to 14 units. Material Composition High-strength ceramic pressed/layered over zirconium oxide understructure In-Lab ...

... Does not contain liquid monomers Material is strong, abrasion resistant and hard Low shrinkage during polymerization Minimal heat production during polymerization Excellent polishing properties Proven material ...

Vertys Precision Recommended to realize temporary crowns and bridges, full denture, stamp ceramic and adjustments. Ideal for making positional gigs. Highly precise regular silicon for adjustments. Color: violet Hardness: 56 Shore A

Ti-Core Ti-Core® reinforced core materials are the only patented, titanium and lanthanide reinforced composite material that matches the strength of dentin. Ti-Core resists the ditching and grooving during ...

Produces ultra-hard dies and casts With its optimum expansion properties, it enhances fit when used for crown and bridge dies and models Has a velvety-smooth, glaze-like finish to master dies Grinds easily without chipping Excellent ...

... onlays, etc After only 2 minutes of placement, an adequate surface texture on the dental porcelain is created to improve the adhesion of the restorative materials or resin; silane works as the bonding ...

priti®multidisc ZrO2 multicolor Translucent For all open milling machines that accept round blanks with a diameter of 98.5 mm priti®multidisc ZrO2 multicolor Translucent is the flexible choice for robust, authentic fully anatomical, monolithic ...

Flexural strength: 800 MPa - 1,500 MPa

... Model Resin is a material based on meth (acrylate) resin for DLP with 385 nm/405 nm LED & LCD system for the production of dental models. It is a high-precision & high-accuracy resin with a smooth matte ...

Temporary crown and bridge resin P-CB, which maintains its strength and precision over repeated uses. And there will be no powder residue during operation, and it can resist certain impact. It can have excellent biocompatibility after ...

Size: 10 mm - 30 mm

Light transmittance 46% Bending strength >1200MPa Sintering temperature 1530℃ Coloring liquid 16 VITA class shades and 29 VITA 30-MASTER shades Typical Indication Fully amatomical crowns Anatomically reduced crowns ...

Flexural strength: 250, 450 MPa

New Frontier of Lithium Disilicate-Based CAD/CAM Blocks Amber® Mill is machinable dental glass-ceramic blocks made of lithium disilicate. Its reinforced mechanical properties and aesthetic values with qualified machinability ...

... product is with lower scale factor, product shrinks more less-one block can be milled most up to 40pcs crowns,greatly lowering dental labs cost. Bridge flexrual strength is about 1300mpa:coping thickness can be lowest ...

The POLYWAX WAX BLANK are used in the fabrication of wax modeling, in the lost wax process for casting, making denture restorations and for frameworks for crown and bridge models . It was developed for cast and pressing ...

A very high strength and at the same time low weight distinguishes this alloy. Grain size: +10/-45µm Compliant with DIN EN ISO 5832-3, ASTM F136 and ASTM F3001 Suitable for processing in the systems: SLM125* - further systems on request Composition ...

... A+ Putty is a kneadable very high viscosity vinyl polysiloxane (VPS) preliminary impression material formulated to guide the flowable BONASIL A+ wash materials highly accurately to the surfaces that are ...

Size: 71 mm
Flexural strength: 1,250 MPa

Beautyzir zirconia -HT is White zirconia famous for its ultra-high strength. The flexural strength after sintering can reach more than 1250MPa, Low translucency-35%,good shading performance.

ventura impress 2 putty soft. Addition putty silicone of soft consistency. Addition putty silicone of soft consistency. Avalable in regular and fast setting times. Features & benefits: High resistance to deformation. High tear strength. Excellent ...

Hard, highly transparent disc produced with resins (PET-G) that limit the formation of bubbles during heating. It can be applied over the resin. Used for the realization of temporary matrices, surgical spoons, containment and protection ...

Ensures strong mechanical bond between porcelain and the resin matrix of the composite. Provides surface roughness. Easy to control and place.

Size: 12 mm - 30 mm
Flexural strength: 700 MPa - 1,200 MPa

... transition layers) is a dental multilayer zirconium oxide (4Y-TZP cervical, 5Y-TZP incisal) with natural color and translucency gradient and high flexural strength (1200 MPa cervical, 700 MPa incisal) for anterior- or ...

●Void-free and uniform mixing when used with the automatic mixer ● High tear resistance ● Superior initial hydrophilicity ● Superior dimensional stability INDICATIONS: ● Taking impression for crown and bridge ● Taking impression ...

Self-curing resin for the preparation and manufacture of temporary prostheses. Indications: – Crowns – Bridges – Inlays and Onlays Characteristics: – Preparation time: 30 sec – Exposure time: 60 sec – Compatible mixing gun: type 1:1 Medical ...

Size: 10 mm - 25 mm
Flexural strength: 700 MPa - 1,050 MPa

... Multilayer dental zirconia block YUCERA cad cam block strong zirconia dental lab material veneering Factory Price Transmittance:43%-57% Hardness:1250HV Colors:1250HV Indication:Crown, ...