- Laboratory >
- Physico-chemical analysis >
- Gas sensor
Gas sensors
![temperature sensor](https://img.medicalexpo.com/images_me/photo-m2/303611-18631729.jpg)
... While the sensor continuously measures the oxygen level, a heartbeat signal is also generated providing an immediate warning of any failures. Their long operating life is due to the non-depleting sensor ...
Process Sensing Technologies Ltd.
![oxygen probe](https://img.medicalexpo.com/images_me/photo-m2/113389-16626721.jpg)
Jack Body consists of Aluminum Material. Gas Jacks consist of Chrome Plated Brass Material.
Çağdaş Medical
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/79946-14163829.jpg)
... carbon dioxide sensors for each chamber. Near continuous analysis can be performed in exercise and cyclic hypoxia testing where there's a need to accurately track rapid metabolic dynamics. Unlike systems ...
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/78994-18171964.jpg)
Chose your response time without giving up sensor life or increasing dimensions.
![gas probe](https://img.medicalexpo.com/images_me/photo-m2/69330-19180281.jpg)
... NISTS to suit customer requirements. 1/4″ Hose Barb (other sizes available) Stainless Steel Gas specific ‘collar’ Meets British Standard Available Gas Types are; O2 MA4 MA7 N2O O2/N2O Vacuum Heliox
Meditech
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/129252-18770310.jpg)
Nominal sensor lifetime ≥ 500 000 % volume oxygen hours Output in ambient air 14 mV ... 20.7 mV (Dual Cathode), load 600 Ohms Electrical interface Gold plated slip rings Accuracy meets ISO 80601-2-55 requirements Repeatability ...
Shenzhen Pray-Med Technology Co.,Ltd
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/130960-16830972.jpg)
Pressure range: 0 kN/m² - 100 kN/m²
... Recommended storage temperature: - 5℃ ~ 15℃ Recommended load: - ≥ 10Ω Preheat time: - <30 minutes, after replacing the sensor Rated sensor life: - ≥ 1000 000% volume oxygen hour Weight: - About 28G
Shenzhen Amydi-med Electronics Tech
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/301348-19966960.jpg)
For CITY MOX-4 gas sensor anesthetic medical oxygen sensor MOX-4 O2 sensor GAS SENSOR Original authentic M0X-4
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/68549-18769292.jpg)
g.SENSOR 8 fNIRS allows you to record functional near-infrared spectroscopy from 8 fNIRS channels. The device comes with a magnet holder shell to mount the unit on the g.GAMMAcap or on the g.Nautilus Wearable EEG headset. ...
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/97479-18585755.jpg)
Replacement: Analytical Industries PSR-11-915-2 City Technology MOX-16 Drager 6850645 Hamilton HM-13,HM-14 Ohmeda O2 cell 6051-0000-224 Mercury Medical 10-103-07 Packaging: To better ensure the safety of your goods, ...
Shenzhen Medke Technology Co., Ltd
![gas probe](https://img.medicalexpo.com/images_me/photo-m2/101255-16204951.jpg)
... themselves by comfortable handlng. Medcal Gas Probes Functon: Medcal gas probes are desgned to be used on all brands gas outlets. The most common types are shown below. The advantage ...
![carbon monoxide sensor](https://img.medicalexpo.com/images_me/photo-m2/301460-18111034.jpg)
Ultra-low power consumption Low battery alarm Tool-free installation CE, ROHS, FCC, certification
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/304663-18382722.jpg)
... Blood Oxygen Saturation Sensor uses 3M non-woven fabric with moderate viscosity and biocompatibility. Chips imported from the United States are of high quality, accurate, stable, durable, and sensitive. The most advanced ...
Guangzhou Sichuang Hongyi Electronic Technology Co., Ltd
![gas probe](https://img.medicalexpo.com/images_me/photo-m2/125175-18352634.jpg)
... 100g) DIN 13260-2 angle probe with hose nipple 6 mm Versions for air, air/O2, O2, vacuum, N2O and CO2 NF S 90-116 angle probe with hose nipple 6 mm Versions for air, O2, vacuum, ...
GLOOR MEDICAL
![temperature sensor](https://img.medicalexpo.com/images_me/photo-m2/299825-17518171.jpg)
Pressure range: 0 bar - 30 bar
... DN25KF/DN40KF flange adapter for inline-measuring • G1/2-Thread for inline-measuring • electronics with separate sensor (in the above variants: standard chamber | DN25KF | DN40KF | G1/2") • Intrinsically ...
DKS GmbH Engineering
![pressure sensor](https://img.medicalexpo.com/images_me/photo-m2/111253-12993826.jpg)
Pressure range: 25 psi
... microfabrication. The sensor die uses a pair of thermopiles to detect changes in temperature gradient caused by mass flow, delivering excellent signal-to-noise, and repeatability. The “solid state” thermal isolation structure ...
BS-rep GmbH
![ozone sensor](https://img.medicalexpo.com/images_me/photo-m2/119865-19309580.jpg)
Sensitiva Plus ozone sensor is a domestic device designed and produced to give a warning when the ozone gas amount in the room where the application reaches dangerous levels. Sensor It ...
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/94177-18134491.jpg)
Pressure range: 700 mbar - 1,250 mbar
Replacement For Analytical Industries [PSR-11-915] Datascope [Multinex Analyzer] GE (Datex-Ohmeda) [0237-2034-700 Excel Modulus,5250 RGM,5150 Handheld Monitor] GE (Ohmeda) [5120, 5100, 5250 RGM, 4700 Oxicap, 7800, 5125, 5150, Handheld ...
Maxtec
![gas probe](https://img.medicalexpo.com/images_me/photo-m2/93655-17931444.jpg)
Pressure range: 10 bar
AFNOR LOCKABLE PROBES Gas compatibility : - Gaz médicaux
![ambient air sensor](https://img.medicalexpo.com/images_me/photo-m2/4580858-19212533.jpg)
Monitors and reports air quality inside your home, school or business. Measures air pollution from cooking, cleaning, wood burning, interior decoration, smoking and wildfire smoke and traffic pollution entering the building. View real-time ...
IQAir
![oxygen sensor](https://img.medicalexpo.com/images_me/photo-m2/304214-17655882.jpg)
... Additionally, the acquired sensor data can be used to extract heart rate information. This sensor has been developed in cooperation with the R&D company Charles River Analytics to provide a new miniaturized ...
![flow sensor](https://img.medicalexpo.com/images_me/photo-m2/120972-15424486.jpg)
... Oxygen measuring device with a Zirconia Sensor The oxygen sensor module PZA-MC25 is a complete solution for oxygen concentration measurement in the range from 1 ppm and up to 25 Vol% O2. The oxygen ...
Pewatron AG
![ozone sensor](https://img.medicalexpo.com/images_me/photo-m2/75774-10910077.jpg)
... the perfect tool for fast and high accuracy ozone monitoring in laboratory and outdoor environments. This portable ozone sensor is very appropriate for ozone monitoring in microarray applications. Actually fluorescent ...
![temperature probe](https://img.medicalexpo.com/images_me/photo-m2/80622-17153390.jpg)
... -type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3') from the handle to the thermocouple connector with the meter. The extended length and round, pointed ...
![gas probe](https://img.medicalexpo.com/images_me/photo-m2/123991-18914510.jpg)
Pressure range: 3.5 bar - 5 bar
AGSS probe vacuum pump model complies with ISO 9170-2 (1L) standard. This probe is suitable for a terminal unit based on a centralized AGSS system driven by vacuum pumps.
![gas probe](https://img.medicalexpo.com/images_me/photo-m2/123991-18914392.jpg)
AGSS probe venturi model complies with ISO 9170-2 (1L) standard. Suitable for AGSS terminal unit based on venturi system
Your suggestions for improvement:
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining