IV poles

In all clinical and polyclinic environments that need to be sterile, Infusion pump bearing through improved stand system.

Anesthesia stand (not equipped) Made of chromed steel. H120 cm.

On a 5-spoke Abs base on wheels with steel counterweight. Special clinic spoke-base to allow for stability and to maximize space.

Made of type Aisi 304 stainless steel, clamps and orthopedic accessories holders not included.

Can be tilted to maintain the vertical position, height adjustable (from 800 mm to 1500 mm), complete with hooks and clamp.

5 arm steel base with chrome plated finish; 5 castors with 2 brakes; Height adjustable from 1280-2190mm

5 castors with 2 brakes; Height adjustable from 1000-1950mm

One hand operated release and looking. “Hook on” clamp 10-307 included. Specifications for Infusion Stand Height - 94,5-149cm Width - 6,5cm Weight - 2,4kg Material - Stainelss steel, Plastic

Infusion stand with Reison rotatable “hook on” clamp 10-307, with easy locking! Specifications for Infusion Stand Rotatable Clamp Height - 105-155cm Width - ...

Infusion stand, up right with “hook on” clamp. Specifications for Infusion Stand upright Height - 105-155cm Width - 24cm Weight - 2kg Material - Stainless steel, Alunimum

Hydraulic elevation irrigation tower. Entirely made of 18/10 AISI 304 (X5CrNi1810) Stainless Steel. Height adjustment from mm 1380 to 2500, pedal-operated. 5-spoke anti-tip base Ø 675 mm. 5 twin castors Ø 75 mm, 2 of which ...

Hydraulic elevation IV stand. Entirely made of 18/10 AISI 304 (X5CrNi1810) Stainless Steel. Height adjustment from mm 1625 to 2815, pedal-operated. Base with 5 anti-tip tubular spokes Ø 35 mm, Ø 600 mm with safety ...

Manual elevation IV stand. Entirely made of 18/10 AISI 304 (X5CrNi1810) Stainless Steel. Height adjustment from mm 1710 to 2835 by means of a safety knob with interference on polymer clutch. Fully metal height ...

The VALVA‑CARE is our space-saving wall infusion holder and has a load capacity of up to 12 kg with a hook load capacity of 3 kg each. The height can be continuously adjusted up to 39 cm using the handwheel. Depending on the selection, ...

The ECCO‑CARE infusion stand has a load capacity of 14 kg and a foothold of 110 . The height is continuously adjustable using a handwheel and is possible in the range between 126 cm and 215 cm. With a ...

Stainless steel IV pole Angled 45° with 4 hooks Max load 2 kg per hook

The Irrigation Tower can hold up to eight (8) 5 liter bags with no electric or hydraulic parts that require overnight recharging, heavy maintenance, or seals that leak. Great for fluid-intensive irrigation procedures such as arthroscopic, ...

Infusion stand. With 2 hooks - stainless steel.

Transfusion (IV) pole. Clamp for mounting: 1164601.

• Metal frame. • Height adjustment. (manuel) • Aluminium injection legs. • Castors. • Quartet hanger bracket. • Upper part is chrome-nickel coated. • Electrostatic powder coated frame. (RAL 9010) Height adjustment:1330 - 2270 ...

• Metal frame. • Height adjustment. (manuel) • Castors. • Double hanger bracket. • Upper part is chrome-nickel coated. • Electrostatic powder coated frame. (RAL 9010) Height adjustment:1120 - 1890 mm Castors diameter:50 mm

• AISI 304 stainless steel • 4 psc plastic or stainless stand hooks • Can be attached an infusion pump • Plastic clips system toadjust height • 050 mm Five wheels • Dimensions: (Wx Lx H) 600x 1200/2100 mm. (Stainless steel hook) (W ...

• AISI 304 stainless steel • 4 psc plastic or stainless stand hooks • Can be attached an infusion pump • Plastic clips system toadjust height • 050 mm Five wheels • Dimensions: (Wx Lx H) 600x 1200/2100 mm. (Stainless steel hook) (W ...

Accessories for Operating Table IV Hanger

Suspension height in the range of 1200 - 2100 mmis being set. It has two serum hooks. It is produced with four serum hooks upon request. Production is made in different sizes and models upon request. Made of AISI 304 quality ...

Transfusion pole provides patients with a continuous supply of fluids and medicine Key features Four grips – polymer hooks Max load of 2kg per hook Height adjustment 80-140cm Pipe diameter: 25/18mm Weight 1kg Our ...

– For use in sterile environments – Five castors – Available with 4 Stainless Steel hooks – Adjustable height by hand – Ease of mobility – Dimensions (WxLxH) : 600x1200x2100Hmm

– Made of 304 grade stainless steel – For use in sterile environments – 4 hooks hanger system – Adjustable height by hand – 5 castors plastic feet – Ease of mobility – Dimensions (WxLxH) : 600x1200x2100Hmm

– Made of 304 grade stainless steel – For use in sterile environments – Available with 4 hooks – Telescopic system one-handed height adjustment – 5 castors – Ease of mobility – Dimensions (WxLxH) : 600x1200x2100Hmm

... carry and collision can be prevented in out-of-use situations. Accessory Fixing Rail accessories can be fixed on the IV pole. Height and its rotational direction might be adjusted by its screw stopper knob.

... --1500mm; *locking collar allows for easy height adjustment; *hooks folded to pack and ship easilly; *thickness of pole is 1mm,diameter is 16-22mm;

IV poles, or intravenous poles, provide patients with a continuous supply of fluids and medicine. Come in different sizes and are constructed of brass or stainless steel. Max. payload: 50 kg

Non-magnetic stand for hypodermoclysis: Realized in tubular of stainless steel 18/10; Running on 5 castors, of which 2 with brake; Telescopi until cm 280 h with black grip handle; Equipped of 4 arms in stainless steel 18/10; 1 ...

Weighted and concave star IV stand Weight of the set 6 kg Legs in epoxy steel, thickness 6 mm Ø 50 mm castor or Ø 80 mm castor on large model The hooks on our infusion stands ...

Nylon moulded and 18/10 stainless steel (304) IV stand Configuration 2 or 4 stainless steel safety or U hooks Ø 30 mm sheat, Ø 16 mm rod Height from 2000 to 2400 mm In normal or heavy version Stainless ...

... mm The hooks on our infusion stands are are safety hooks as standard. For "U" shaped hooks, go to accessories and options. Aluminium IV stand with 2 or 4 hooks