Locking compression plates

... F136) Fixed-angle, threaded locking hole: Multifragmentary angular stability. Preformed anatomical design: The plates adapt to the anatomy of the radius, minimising the need for bending in surgery. Combined ...

Thickness: 0.8, 1.2 mm

... within the hand. The bevelled edges of the plates and the design of locking holes (screw heads do not protrude above the plate surface) significantly reduce the irritation of peri-implant ...

Length: 49, 104 mm
Thickness: 1.2 mm
Hole diameter: 3.5 mm

... screw. In case of some plates cannulated screwing technique can also be used. The second-type polyaxial plate system offers a big portfolio of plates for the well-known small and ...

– High precision and high quality medical supplies – High-tech and advanced Turning & Milling machinery – ISO13485 certified – Over 15 years experience in manufacturing medical products – Made in Taiwan – Dental reconstruction – ...

... Type I and II Rockwood Type I and II Acute infection Features and Benefits One solution for two indications The Locking Clavicle Hook Plate provides a single solution for fixation of both lateral clavicle ...

Length: 3.5, 2.7 mm

Cervicle Locking Plate · 3.5mm Clavicle Hook Locking Plate · 3.5mm Clavicle Reconstruction Locking Plate · 2.7/3.5mm Clavicle Reconstruction ...

Hole diameter: 3.5 mm
Number of holes: 4 unit

... application throughout the midfoot and rearfoot for the fixation of osteotomies, fractures and arthrodesis Range: Straight plates & H plates Short / Medium / Long

S-type clavicle locking plate Hook locking plate Clavicle plate Hook locking plate

Length: 54, 63, 72, 90, 108 mm
Hole diameter: 2.7, 3.5 mm
Number of holes: 3, 4, 5, 7, 9 unit

TITANIUM VP DISTAL RADIUS LOCKING PLATE - 2.7 / 3.5 mm - RIGHT 2334-003 3 Holes 54 mm 2334-004 4 Holes 63 mm 2334-005 5 Holes 72 mm TITANIUM VP DISTAL RADIUS LOCKING PLATE ...

... minimal soft tissue damage. Locking plates provide improved stability, even in patients with poor bone quality, while reducing screw- loosening. Loss of screw purchase in the bone can result in loss of ...

Length: 60, 69, 77, 86, 94 mm
Thickness: 2.2 mm
Number of holes: 3, 4, 5, 6, 7 unit

... need for bone graft Variable angle locking Holes allow up to 15° off-axis screw angulation in all directions in order to address the individual fracture patterns The head of the 2.7mm variable angle locking ...

Length: 6 mm
Number of holes: 2, 8 unit

Aconda is an anatomie and dynamic plate for fixation of proximal femur having five modules to fix proximal femur. The system has normalcutl and smallcut models having locking and dynamic models. The material ...

957-357-32060 957-257-32060 14×60×L 957-357-32070 957-257-32070 14×70×L 957-357-32160 957-257-32160 14×60×R 957-357-32170 957-257-32170 14×70×R

Length: 180, 220, 54, 120 mm
Thickness: 1.8, 1 mm
Hole diameter: 2.5, 5, 1.2 mm

Volar distal radius plate with TIC™ (Titanium Inlay Clip) Technology for polyaxial screw locking, indicated for the treatment of distal radius fractures including styloid fractures.

Number of holes: 6, 7 unit

Anatomical profile plate, with compression and locking holes. Features specific profiles for left and right member. – Low Profile; – Low contact; – Tapered tip; – Mask in peek with ...

Length: 20, 81 mm

1.Low profile, super bonegraft window. 2.Round edge, reducing tissues stimulation. 3.Anatomically prebending desin. 4.Midcourt line sunken design, easy for location. 5.Anti-recess. 6.Simple, effectively anti-pullout of screw.

- Optimal Fit - Screw Trajectory - Fully Instrumented System - Pre-contoured Plates

Length: 70, 100, 115, 85 mm
Thickness: 3.5 mm
Hole diameter: 4.1 mm

... shaped plates provide fixation for lateral clavicle fractures with xloc locking screws to lock the plate and to build a fixed-angle construct. FEATURES Anodized type II Reduced ...

... of the plate is the same at all the sizes, there are 10 holes for locking screws. The shank part of the plate has from 4 to 12 locking holes and one oval hole. The longer ...

... option of the anatomic plates provide to fix the multifragmentary fractures easily and correctly. For easy recognition, all the anatomic shaped Left plates are colored bLue and the Right plates ...

Thickness: 2 mm

... Characteristics Anatomically pre-formed plate design, usable on the right and left High primary stability thanks to Ø 2.5 mm and Ø 3.0 mm locking cortical screws Plate thickness ...

WINSTA-R Locking Distal Radius Plate, 3 holes, right

... holes allowing reduction and stabilization of the Wagstaff fragment/AITFL to the plate • Anatomic medial malleolar plate o Patent-pending design (US29/719,840) o Specifically designed to allow buttress ...

Length: 70, 84, 98, 112 mm
Thickness: 3.5 mm
Number of holes: 9, 8, 6, 7 unit

Temporary fixation of fractures, malunions, nonunions, osteotomies and pseudoarthroses of the clavicle, particularly for patients with osteopenic bone

Length: 64, 87, 98.5, 121, 199.7 mm
Thickness: 1.6 mm
Number of holes: 2, 4, 5, 7, 13 unit

... ankle joint. The plates are designed to be used with both locking and non-locking screws although locking screws provide stronger and more stable fixation. All the ...