Metallic compression plates

Length: 25.7 mm
Thickness: 1 mm
Hole diameter: 2.1 mm

Φ 2.1 Holes: 2×4 Length 25.7 Width 12.2 Thickness 1.0

Thickness: 0.8, 1.2 mm

... allow to manage a wide range of fractures within the hand. The bevelled edges of the plates and the design of locking holes (screw heads do not protrude above the plate surface) significantly reduce ...

Length: 49, 104 mm
Thickness: 1.2 mm
Hole diameter: 3.5 mm

... Medimetal offers two different types of polyaxial plate systems. As per the functioning method of the first-type polyaxial plate system, lamellas are designed to be located in the holes of the plate. ...

– High precision and high quality medical supplies – High-tech and advanced Turning & Milling machinery – ISO13485 certified – Over 15 years experience in manufacturing medical products – Made in Taiwan – Dental reconstruction – ...

... everything that is essential for procedures in oral and maxillofacial surgery. From plates, meshes and screws, through to lasers and patient-specific implants. The sum of plates and screws for fixing ...

... Rockwood Type I and II Acute infection Features and Benefits One solution for two indications The Locking Clavicle Hook Plate provides a single solution for fixation of both lateral clavicle fractures and cromioclavicular ...

In clinical practice for maxillofacial reconstruction, bone grafts, bone cement and standard implants (meshes, plates and screws, augments) used are traditionally shaped manually (bent and cut), either preoperatively ...

Length: 3.5, 2.7 mm

Cervicle Locking Plate · 3.5mm Clavicle Hook Locking Plate · 3.5mm Clavicle Reconstruction Locking Plate · 2.7/3.5mm Clavicle Reconstruction Locking Plate (with extension) · ...

Number of holes: 5, 6 unit

Low profile of plate/screw minimize patient palpability Time savings through a variety of plates, screws & instruments Safety & convenience due to stable & wireless fixation

Hole diameter: 3.5 mm
Number of holes: 4 unit

... application throughout the midfoot and rearfoot for the fixation of osteotomies, fractures and arthrodesis Range: Straight plates & H plates Short / Medium / Long

... associated with spinal fixation systems such as CTJ and G2S® makes it possible to protect the dura mater from pulmonary compression in the case of Pancoast tumor. The ThoRib® system is available in sterile or non-sterile ...

Length: 54, 180 mm
Hole diameter: 2.7, 3.5 mm
Number of holes: 3, 13 unit

TITANIUM HI DISTAL RADIUS PLATE - 2.7 / 3.5 mm - RIGHT 2347-003 3 Holes 54 mm 2347-004 4 Holes 62 mm 2347-005 5 Holes 70 mm TITANIUM HI DISTAL RADIUS PLATE - 2.7 / 3.5 mm - LEFT 2348-003 3 ...

Length: 90, 210, 126, 138, 114 mm
Thickness: 3 mm
Number of holes: 4, 5, 10, 6, 13 unit

... including one elongated hole that helps in plate positioning In the long plate distal shaft consists of 7-13 elongated combi holes Plates can be used with the LISS Plate ...

... specific Lateral Superior, Midshaft Superior, and Anterior Plates. 2.7 mm Locking/Non-Locking Screws, 3.5 mm Locking/Non-Locking screws, 4.0 Cancellous Lag Screw. The Midshaft Superior Plates are designed ...

Length: 60, 69, 77, 86, 94 mm
Thickness: 2.2 mm
Number of holes: 3, 4, 5, 6, 7 unit

Screws offer a locked construct to support the articular surface and reduce the need for bone graft Variable angle locking Holes allow up to 15° off-axis screw angulation in all directions in order to address the individual fracture ...

... the properties specified by the professionals, in order to obtain the best results. Mandible Reconstruction Plate With Anatomical Plates The device is designed and manufactured using the symmetry ...

... qualities. The plate present a distal low profile to prevent any irritation of soft tissues or lesion of the flexor tendons. The plate is preformed to the anatomy of the radius and therefore respects ...

Length: 6 mm
Number of holes: 2, 8 unit

Aconda is an anatomie and dynamic plate for fixation of proximal femur having five modules to fix proximal femur. The system has normalcutl and smallcut models having locking and dynamic models. The material is MRI friendly ...

957-357-32060 957-257-32060 14×60×L 957-357-32070 957-257-32070 14×70×L 957-357-32160 957-257-32160 14×60×R 957-357-32170 957-257-32170 14×70×R

Length: 180, 220, 54, 120 mm
Thickness: 1.8, 1 mm
Hole diameter: 2.5, 5, 1.2 mm

Volar distal radius plate with TIC™ (Titanium Inlay Clip) Technology for polyaxial screw locking, indicated for the treatment of distal radius fractures including styloid fractures.

Number of holes: 6, 7 unit

Anatomical profile plate, with compression and locking holes. Features specific profiles for left and right member. – Low Profile; – Low contact; – Tapered tip; – Mask in peek with carbon fiber; – ...

Length: 20, 81 mm

1.Low profile, super bonegraft window. 2.Round edge, reducing tissues stimulation. 3.Anatomically prebending desin. 4.Midcourt line sunken design, easy for location. 5.Anti-recess. 6.Simple, effectively anti-pullout of screw.

- Optimal Fit - Screw Trajectory - Fully Instrumented System - Pre-contoured Plates

Volar Distal Radius Plating System The GEMINUS ® Volar Distal Radius Plating System features a unique dual head design that improves fit to the volar radial surface, minimizing the potential for flexor tendon injuries while providing ...