RX-800A, the flagship model of RX-800 series infant incubator supports a 10.2 inch high resolution touch-screen, which whilst allows direct access to all parameters, trend curve, alarm management, as ...
Dimension : 930 x 600 x 1320-1520 mm Power Requirement : AC 220 V, 50 Hz, 350VA Heater output : 350 Watt Panel indicator ...
PT. FYROM INTERNATIONAL
Weight: 120 kg
Length: 57.7 mm
Width: 99.7 mm
... reading with the other two sensors. If the reading of sensor is differ from 0.8 degree, the alarm will be triggered The incubator is equipped with both thermocouple and mechanical temperature switch to protect the ...
Neotherm Premature Baby Incubator is developed in such a way that temperature level can be maintained uniform with minimum possible over & under shoots via unidirectional airflow mechanism. PID Based Servo Temperature ...
General use It is suitable for the growth and development of premature or sick children. Structure composition It is composed of main engine (including baby compartment, chassis), skin temperature sensor, infusion rack, tray and ...
Being Technology
Length: 1,650 mm
Width: 750 mm
Height: 1,100 mm
The incubator is designed for nursing and intensive care of newborns, including premature babies with a critically low weight (from 500 g) in neonatal intensive care units, intensive care units, newborn ...
Shvabe-Zurich
It has a Servo-controlled humidity and oxygen system that reaches the set value quickly. (Humidity up to 95% and oxygen up to 85% can be adjusted.) 6" (inch) integrated LCD graphic display capable of displaying all parameters simultaneously 2 ...
ERTUNÇ ÖZCAN
Medical Moveable Infant Incubator Used In Ambulance AG-011A Transport Infant Incubator Specification: Model： AG-011A Mode： Air mode and Baby mode controlled by micro-computer Power： ...
Jiangsu Aegean Technology
... Diagnostics Incubator System nomag®IC advanced, LMT Medical Systems GmbH has brought functionality many steps forward. Patient access and noise protection in the MR scanner were improved, a wider patient bed and reduced ...
● Servo Control Mode: air temperature, skin temperature; ● Instant Parameter Displaying: set temp, air temp, skin temp, internal humidity, heat power rate; ● Audible & Visual Alarms: power failure, sensor failure, higher & lower ...
... Failure, Power Failure, Air Flow Failure, Temperature > 39 ° C Automatic Heater cut off if air / skin temperature inside the incubator exceeds 39° C Accessories: Auxiliary Tray for placing additional equipment Optional ...
Tali Medical
... temperature set function Triple protection for over temperature with separate cut off device, more safety system The inclination of infant bed is adjustable Single wall hood, 4 operating windows and 2 iris ports Independent ...
Weight: 190 kg
Length: 950 mm
Width: 645 mm
Infant Incubator is one of the important equipment used in medical institutions. It is mainly used for constant temperature cultivation, temperature resuscitation, oxygen delivery, rescue, hospitalization ...
Weight: 80 kg
Width: 99.7 cm
Height: 126.1 cm - 146.1 cm
The air circuit of the PG NEST incubator provides a quiet and comfortable environment, helping to reduce outside noise. The internal temperature is monitored and controlled on various points to ensure accuracy and safety, ...
X-ray shooting rack: The X-ray film box holder is placed under the crib and can be weighed without moving the baby. Humidifying tank: Intelligent humidifying tank can control humidity of 30-90% RH. The water tank can be taken out as ...
Shanghai Huifeng Medical Instrument
1.The X-ray film box holder is placed under the crib and can be weighed without moving the baby. 2.Intelligent humidifying tank can control humidity of 30-90% RH.The water tank can be taken out as a whole,which is easy to add water,clean ...
Shanghai Huifeng Medical Instrument
1.The X-ray film box holder is placed under the crib and can be weighed without moving the baby. 2.Intelligent humidifying tank can control humidity of 30-90% RH.The water tank can be taken out as a whole,which is easy to add water,clean ...
Shanghai Huifeng Medical Instrument
... with clean air and appropriate temperature for low-severity infants, critically ill infants and premature infants. Infant incubator control system adopts computer technology to implement servo control ...
Weight: 68 kg
Length: 1,125 mm
Width: 665 mm
The Infantia NB1 features servo-control, as well as quiet windows that minimize disturbance to the infant during nursing Features Servo-controlled by micro-computer Quiet windows reduce disturbance to the baby ...
Avante Health Solutions
Weight: 80 kg
Length: 138 cm
Width: 40 cm
Use AC power and DC power alternatively, and DC 12V or DC 24V power in an ambulance Set temperature, air temperature, baby temperature and internal battery voltage can be displayed separately Can be equipped with >37°C temperature ...
Avante Health Solutions
Weight: 99.3 kg
Width: 102.4 cm
Height: 135.4 cm
The Avante Infantia NB500 Incubator is specifically designed for infants, offering precise thermoregulation with control over temperature and humidity. It creates an optimal recovery environment for neonates with minimal ...
Avante Health Solutions
Weight: 68, 63 kg
Length: 1,085, 1,125 mm
Width: 640, 665 mm
... Failure alarm indication; RS-232 connector; Oxygen input interface; HB-90AB is configured nicu incubator,transport infant incubator,hospital incubator ...
Weight: 80 kg
Length: 1,085 mm
Width: 640 mm
... temperature control range: 25°C -37°C (override mode: 37-39°C is optional) The temperature difference between incubator temperature and average incubator temperature(under steady temperature condition)≤0.5°C Temperature ...
Weight: 53 kg
Length: 109 cm
Width: 65.5 cm
... during transport can be harmful to the baby. HB2000 is an incubator transporting babies safely and without disturbance. Product Description Infant Transport Incubator Neonatal ...
Control mode: Air mode Two level humidity adjustment RS232 connector Optional parts: Up phototherapy unit and down phototherapy unit
Weight: 80 kg
Width: 99.7 cm
Height: 126.1 cm - 146.1 cm
... Uniformity Mediwaves series incubator’s air circuit system is designed based on massive experimentation. With plenty aerodynamics knowledge, the temperature uniformity is improved as much as possible in order to give ...
Weight: 93 kg
Length: 1,130 mm
Width: 680 mm
• Product parameters Standard Configuration: Humidity control, Temp (skin temperature & incubator air temperature), O2 concentration monitoring Safety Standards: ISO 13485:2003 approved, MDD 93/42/EEC as amended ...
... Multiple self-checking alarms with audible and visible Heating power rate indicates 0 – 100% Standard Configuration Hood Infant bed Temperature controller Skin temperature sensor Aluminum water tank Air filter Guardrail I.V. ...
Length: 1,050 mm
Width: 650 mm
Height: 1,850 mm
Baby incubator – Open Care System by ASCO is designed to meet requirements of premature infants. In pre-mature baby certain key organs are underdeveloped, they need a special care. ASCO baby incubator ...
Length: 645 mm
Width: 950 mm
Height: 1,250 mm - 11,450 mm
Infant incubators are designed to support developmental care for newly born babies. A controlled environment with automatic and precise temperature controls and active humidifiers for observation and ...
Please specify:
Help us improve:
remaining