Pressure regulators

MRI compatible oxygen regulator Connects to Wall and Tank sources simultaneously (with no interruption) Built-in pressure gauge (avoids damage) Built-in Flow Meter (0-15LPM) Built-in permanent ...

Output pressure: 16 bar
Height: 48, 52, 70 cm
Width: 15, 19 cm

Available in simple or duplex versions, NOVAIR Medical pressure reducers come with upstream filtration and all safety and distribution accessories required. Diaphragm regulator Safety ...

Flow: 0 l/min - 25 l/min
Output pressure: 50 psi

• Aluminum body with brass high pressure chamber • 1-1/2” diameter UL-listed gauge • Complies to CGA standards • Internal relief valve • Hose barb outlet • Sintered bronze inlet filter for longer service ...

Mini air/water regulator Mini pressure regulator fixed 35 PSI in line

for outlet pressure regulation Pressure regulation set enables user to adjust desired output pressure. The sets are delivered according to the compressor type: REG 1 - DK 50 Z, ...

Flow: 0 l/min - 25 l/min
Inlet pressure: 200 bar
Output pressure: 4.5 bar

... from Rotarex Meditec is an all-in-one valves for Medical oxygen therapy. It combines shut-off valve, Residual pressure device, pressure regulator, flow selector, hose barb, medical outlet ...

Flow: 0 l/min - 25 l/min
Height: 1.8, 2.5 in
Weight: 31, 24 g

... different configurations of pressure outlets are available. Input connections of either nut and stem or pin indexed yoke are available as well as regulator for Entonox® analgesic gas. By providing ...

Flow: 250 l/min
Inlet pressure: 300 bar
Output pressure: 4.5 bar

Pressure reducer for medical oxygen compliant with the standard ISO 10524-1 Made of surface treated brass Oxygen cylinder connection type UNI 4406 Output connection: 3/8” (three eighths of an inch) Compliance: ...

Inlet pressure: 0 mbar - 1,100 mbar

... Flow EZ™ Adapt module is a pressure reducer. Placed between two LineUp Flow EZ™ or LineUp™ Push-Pull pressure-based controllers having different input requirements, it allows one to have a system with ...

Inlet pressure: 60, 25 bar
Output pressure: 0.5 bar - 10 bar
Weight: 13 kg

... Steel High-performance dome-loaded pressure regulator-set. For high and varying flows requiring maximum pressure stability. A complete solution, applicable as a manifold pressure ...

Flow: 30, 14, 6, 50, 15 l/min
Inlet pressure: 0 bar - 200 bar
Height: 128 mm

The EasyCARE® PLUS two stage pressure regulators are suitable for direct mounting on oxygen and medical air cylinders. The structure is very compact and lightweight and they are particularly suitable ...

Inlet pressure: 0.2 bar - 200 bar

... especially liquified gases. The regulator is designed to reduce inlet pressure to very low outlet pressures and be able to regulate low pressures very precisely. The ...

Flow: 1.5 l/min - 30 l/min
Inlet pressure: 200 bar
Output pressure: 4.5 bar

AEROway® – Fine | Pressure Reducers The AEROway® – Fine pressure reducer with pressure-compensated flowmeter according to DIN EN ISO 10524-1 is ...

Flow: 0.01 l/min

... re-adjust pressure or flow-rate • drain position to quickly empty the valve before disconnecting • no tools necessary for connecting or disconnection Biospir specifications: • Precise two-piston pressure ...

Flow: 0 l/min - 8 l/min

The Roscoe Mini Regulator is the perfect size for small oxygen tanks, at approximately 4.5" compared to the 6" of typical regulators. Made with an aluminum body and all brass core, this regulator ...

Heated Regulator (25-125 CFH Output) EA-285 Electrically Heated Regulator 25 – 125 CFH Output Connects directly to CO2 cylinder. Incorporated thermostatically controlled heater prevents regulator ...

... kg) Real time graphical display of tracheal pressure Easy to use color touchscreen Interchangeable between volume and pressure modes Internal pressure monitoring for detection of ...

Height: 475, 560 mm
Width: 500, 560 mm
Depth: 110, 135 mm

The boxes allow to install medical gas valve and reducer, and prevent from the manipulation by unauthorised person. The boxes are made with : - Surface treated 9003 white painted epoxy box - Polycarbonate door with bolt system - ...

Output pressure: 200 bar
Weight: 625 g

Just Press B gas regulators are specially designed for its use in home oxygen therapy services or in hospital facilities with no oxygen piped network available. Features: • They incorporate a manometer ...

Flow: 0 l/min - 70 l/min
Inlet pressure: 200 bar
Output pressure: 4 bar

... requirements / specifications. Our regulators are a class llb medical device offered in two ranges; 55B & 55SL. 55B regulators are manufactured mainly from brass & designed for mobile use in demand ...

OXY508 Oxygen Pressure Regulator Preset to 50 psi with gauge – 1-1/8′ nut

Output pressure: 4 bar - 8 bar

... component in the medical air plant. The medical air regulator group stabilizes the pressure at the desired value and ensures its flow. 7-8 bar pressure range is preferred for surgical ...

Flow: 0 l/min - 15 l/min
Inlet pressure: 200 bar
Output pressure: 4.5 bar

A more precise regulation by ten positions. Technical characteristics Gases: Non corrosive Input connection: Depending gas Outlet connection: ¼”G / 9/16” / nozzle 6mm

Flow: 10 m³/h
Inlet pressure: 4,000 psi
Output pressure: 200 psi

... impurities OEM ODM With 12 years experience supply gas regulator It is medium regulator suit forwelding and cutting industry. Twin gauges design , easy to read gas cyl-inder pressure ...

Medical-grade regulator, displays cylinder pressure and facilitates controlled gas dispensing