Pressure regulators with flow selector

Flow: 0 l/min - 25 l/min
Inlet pressure: 34.5 bar - 206.7 bar
Weight: 0.8 g

... Oxygen Regulator, same as Model 830, except with international 0-4000 psi booted pressure gauge. Strong uni-constructed body CGA 870 pin index connection 0-3,000 psig Gauge Fixed-orifice flow ...

Flow: 0 l/min - 25 l/min
Inlet pressure: 300 bar
Output pressure: 4 bar

... with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied by medicinal gas Lateral and frontal reading of flow settings The higher ...

Inlet pressure: 15 bar - 200 bar
Output pressure: 4.5 bar
Weight: 1,000 g

... entering the Pressure Regulator. To ensure long-term gas purity, we designed the Pressure Regulators in such a way that the sinter filter can be easily removed and replaced ...

Flow: 0 l/min - 25 l/min
Inlet pressure: 200 bar
Output pressure: 4.5 bar

... Rotarex Meditec is an all-in-one valves for Medical oxygen therapy. It combines shut-off valve, Residual pressure device, pressure regulator, flow selector, ...

Flow: 9 l/min

... are available in a version with preset calibration of the outlet pressure with single gauge to check the cylinder contents, or with adjustable pressure and a flow gauge to check the flow ...

Flow: 0 l/min - 25 l/min
Output pressure: 50 psi

With built-in flowmeter Can be applied for various types of O2 cylinder, with high quality and low repair rate. With UL certified gauge. With GMP, ISO 13485 & CE certificates. Material: Pure brass body with chrome

Flow: 0 l/min - 15 l/min
Inlet pressure: 200 bar
Output pressure: 4.5 bar

A more precise regulation by ten positions. Technical characteristics Gases: Non corrosive Input connection: Depending gas Outlet connection: ¼”G / 9/16” / nozzle 6mm

Flow: 300 m³/h

High Pressure Regulator - 300m3/h X: O2 / N2O / CO2

Flow: 0 l/min - 15 l/min
Inlet pressure: 3,000 psi
Output pressure: 55 psi

... made of métal injection aluminum, made in the U.S.A. • Diaphragm régulation system. • High pressure analog manometer. • Overpressure relief valve. Flowmeter Manufacturing Materials: • Body: Brass ...

Flow: 1 l/min - 15 l/min

... connection. Pressure regulator with flow selector for gas therapy series 2270 Technical data SUITABLE FOR THE FOLLOWING GAS: 02 MAX INLET PRESSURE: ...

Inlet pressure: 200 bar
Output pressure: 0 bar - 10 bar
Height: 117 mm

... at a variable or fixed supply pressure from a high-pressure gas cylinder. The reduc hp1 is fitted with a high pressure gauge for the cylinder pressure and a low pressure ...

Flow: 0 l/min - 15 l/min

... or to the hose connector (optional) Filter positioned at the inlet of the burette to protect the patient and the flowmeter itself Gas flow adjustment is possible through the knob on the front of the ...