Proximal fixation intramedullary nails

Degree of curvature: 4 °

The Evo-Nail PLUS is a nail that allows the surgeon to treat a wide spectrum of femoral fractures, offering advantages such as a simplified surgical procedure and different surgical options. The 10 ...

Length: 180, 250, 150 mm

... talus for secure fixation. Miss-A-Nail Screw Option Additional compression and rotational stability of fusion site augmented by positioning cannulated screw either anterior or posterior to nail, ...

Length: 160 mm - 300 mm
Proximal diameter: 10 mm
Distal diameter: 9, 8, 7.5, 7 mm

The Humerus Nails System is a comprehensive system for the solution of Humeral Fractures. In TDM we have two types of this nail: - Long Nail - Short Nail • ...

... way that the nail can be locked with a hand targeting device through a special locking hole. This way surgery time and radiation load can be significantly reduced. Key advantages: – multiplanar proximal ...

Length: 24.4 mm - 420 mm

... and accelerating the patient’s recovery. It was developed to stabilize femur fractures through its insertion into the intramedullary canal, maintaining alignment and facilitating healing, with less chance of shortening ...

... implantation is smoother. ♦ The cannulated main nail design ensures that the main nail can be inserted into t he medullary cavity convenient iy, quickly and accura tdy t hrough a guide needle. ♦ Scientiflc ...

Length: 150 mm - 280 mm
Proximal diameter: 10, 11 mm
Degree of curvature: 5 °

... continuous carbon fibers reinforced polymer. Two Humerus nails are available -Proximal Humerus Nail with four way locking at the proximal end. The screw holes are threaded ...

Length: 140 mm - 340 mm

The ARZZT solid and cannulated intramedullary nails for the humerus have the particular feature of being able to block the proximal part in three ways and on three planes, allowing for ...

Length: 180 mm - 420 mm
Proximal diameter: 15.5 mm
Distal diameter: 9 mm - 12 mm

... material. Design of implants The anatomical fit provides easy insertion. The distal end of the nails has an oval hole for dynamization. For slim bones, nails with smaller diameter i.e.

Length: 150 mm - 480 mm
Degree of curvature: 125, 130 °

... Distal groove with two locking options: static or dynamic Proximal markings for radiographic reference (5 and 10 mm) to indicate the nail insertion depth LNS GT SHORT NAIL AND LNS-GT ...

Length: 180 mm - 480 mm
Proximal diameter: 10 mm - 15 mm
Degree of curvature: 120, 125, 130 °

... treatment for the patient. The short and long proximal intramedullary femur nails (PFN) are cannulated to facilitate insertion control and feature a universal anatomical design. It is ...

Length: 320 mm - 420 mm
Proximal diameter: 10, 11, 12 mm

Diameter: 10 - 11 - 12 Length: 320 - 340 - 360 - 380 - 400 - 420 Set: 1 Nail - 2 End Cap - 1 Lag Screw - 1 Distal Screw

Length: 180 mm - 440 mm
Proximal diameter: 9, 10, 11, 12 mm
Degree of curvature: 130 °

Several distal locking options Static or dynamic locking can be performed via the aiming arm with PFNA standard, small and xs. The PFNA long additionally allows for secondary dynamization. Increased stability caused by bone compaction ...

Length: 10 mm - 460 mm
Degree of curvature: 130, 5 °

... indicated for the treatment of stable and unstable intertrochanteric, pertrochanteric and subtrochanteric fractures. EBA2 fémoral nail is designed to allow a controlled sliding of the two cephalic screws and a rapid and ...

Length: 150 mm - 270 mm
Proximal diameter: 4, 9, 8, 7 mm
Distal diameter: 4, 9, 8, 7 mm

... locking feature for anterograde intramedullary nailing of the humerus. The instrumentation is compact and the surgical technique reproducible. Two versions: – short nail for proximal ...

The AOS Da Vinci Tibial Nail System is intended to provide stabilization of various types of fractures, malunions and non-unions of the tibia. It is intended for long bone fracture fixation of tibial ...