... to be verified. The steam penetration determined by the measurement system is continuously evaluated during the running sterilization program. A warning appears in the event of a failure. The result is prominently displayed ...
The MMM Group Bowie-Dick Helix test conforms to the DIN EN ISO 11140-4 standard and objectively checks your sterilization process for air removal and steam penetration. At full steam penetration the indicator changes ...
Integrators are a Type 5 chemical indicator designed to react to all critical variables in the sterilization cycle: time, temperature and presence of steam. 100 strips/pouch.
Complete range of tests for the control of the sterilization process. Bowie & Dick Test, Helix Test and chemical indicators, check the correct penetration of the steam inside the sterilization load, ...
Process, Workspace, Product & Personal Safety PLUSAFE Series Autoclave Tapes offer a closing solution for wrapped materials. The indicator color change provides a proof for being processed. Easy to peel autoclave tapes are available ...
TBT Medical
Process, Workspace, Product & Personal Safety PLUSAFE Series Bowie & Dick Test Packs are used and assembled to evaluate the performance of steam sterilizers in compliance with EN 285 standard. Water based, non-toxic indicator sheet ...
TBT Medical
... Emulation Indicators are used as verification indicators for every pack in order to check for all critical parameters of a sterilization cycle. The indicator is in compliance with EN ISO 11140-1.
TBT Medical
ZEOSS Ethylene Oxide biological indicators have been developed to control the Ethylene Oxide sterilization process. The biological indicator contains bacterial spores embedded in filter ...
ZEOSS Steam biological indicators have been developed to control the Steam sterilization process. The biological indicator contains bacterial spores embedded in filter paper in a plastic ...
The 3M™ Attest™ Rapid Ethylene Oxide Biological Indicator Test Pack 1298 reliably monitors ethylene oxide (EO, EtO) sterilization cycles. Each convenient and easy-to-use test pack contains a 3M™ Attest™ ...
3M Health Care
Eye-catching green Indicator tape clearly defines when your equipment has been cleaned and ready for use. Developed in conjunction with Guy's & St. Thomas' NHS Foundation Trust, Clinell Clean Indicator Tape allows healthcare professionals ...
... or add them to a sterilisation pouch. Besides test strips, B-autoclave also has other accessories such as sterilization rolls, sterilization bags and sealers. You can also find autoclaves and ultrasonic ...
... pre-vacuum stages. Suitable for the LCpro Mini REF 08136 and 08134 Content: 250 pieces of 4-level indicators STERILIZATION CYCLE 121 °C - 15 MIN. / 134 °C - 3.5 MIN. SINGLE USE YES
... that is unmatched in accuracy, performance and reliability. Our Bowie Dick test provides far more insight into critical sterilization parameters than previously possible, ensuring patient safety. Unlike traditional chemical ...
... supplement to biological indicators and must be used daily to provide rapid indication of whether the critical parameters were correct during sterilisation. However, they are no substitute for biological indicators. Only ...
SSI Diagnostica
Famos process indicators only indicates that the pack have been into the sterilization cycle, but doesn´t measure the parameters of the sterilizer to show if the sterilization was successful. Process ...
Famos
The adhesive layer adheres well to the surface. Printed chemical indicators change their colour after a sterilisation process, informing that the product was sterilised. Application: for closing packages meant for sterilisation by ...
... detection and cultivation of sterilization effect of various biological indicators such as pressure steam sterilization biological indicator, low-temperature plasma sterilization ...
Please specify:
Help us improve:
remaining