Tables

This table is designed as a scale of 1/100,000, with a three-stage shock absorber, which can absorb most of the vibration in the environment more widely. The use of 60mm thick granite countertops can eliminate 3-10 Hz ...

Tables available in a range of shapes and with a selection of bases. Elegant MDF tables made with diamond-effect borders with no sharp edges. The frame is made from metallic painted round-section support ...

Instrument cart with satin-finished stainless steel shelve. Base with four 60 mm diameter antistatic swivel castors, two braked. Dimensions: 1300 x 650 x 900 (h) mm

... adjustable tip or with column basements only for squared or rounded tables. Tables are suitable for wheel chairs insertion. Aviable also in fire-proof version.

TECHNICAL CHARACTERISTICS - BABIES CHANGING TABLE - Steel structure with epoxy coating - Upper part cushioned with foam and upholstered in Skay - Smooth Lower shelf - Dimensions 115x53x86cm - IMPORTANT: Finishing ...

TECHNICAL CHARACTERISTICS - BLOOD EXTRACTION TABLE - Stainless steel structure - Plastic formica upper shelf with middle screen divider - Two cushioned foam pillows upholstered in Skay - Dimensions 120x50x75cm

TECHNICAL CHARACTERISTICS - STERILIZATION TABLE - Stainless steel REINFORCED structure - Smooth stainless steel upper shelf - Four feet - Dimensions 80x60x80cm

Packing table for linen and laundry in general dismountable with detachable panel in laminated wood.

Packing table on wheels for linen and laundry in general completly dismountable with detachanle panel in laminated wood.

Built of a frame made of 35 x 35 mm square section bars and AISI 304 (1.4301) stainless steel sheet with Scotch-Brite surface finish. Upper surface made of completely smooth and flat sheet metal, with rounded corners, supported underneath ...

This cart in Stainless Steel AISI 304 can be used with one of our autopsy sinks. The slope allows a fluid drainage. To make the transport easy, one of the wheels is swivel-locked. When inactive the casters can be locked in place. • ...

The design of our tables has been studied to guarantee a tailor-made experience, in order to adapt to customer requests. The 6ATP11010 (Autopsy Table L-Shaped Elevating and Ventilated) consists of a top ...

The design of our tables has been studied to guarantee a tailor-made experience, in order to adapt to customer requests. The 6ATP192 (Autopsy Table Bariatric Ventilated and Elevating) consists of a bariatric ...

... melamine (see worktops) Work heights of 750 mm (sitting workstation) and 900 mm (standing workstation) Load capacity of fixed version up to 300 kg Load capacity of mobile version up to 100 kg several widths (900, ...

Supplied with 1 adjustable bottom shelf Load capacity: 50 kg on top Legs: 38 mm stainless steel tube, with 30 mm adjustable jacks or 50 double galvanised castors (2 with brakes) Delivered unassembled

New modular design of laboratory furniture provides flexibility and ease of use.

New modular design of laboratory furniture provides flexibility and ease of use.

The Sterling Changing Tables provide a variable height support surface to reduce back strain and posture problems for carers and support staff during routine changing procedures in environments such as special schools, ...

... Laser Console Recess with Extension Wings Tabletop Supplied With: Height Adjustable Leather Padded Arm Rest to suit: Combo & Integrated Laser system Dimensions (cm): Table TOP: 90(D)*23(W)*60(H),23 ...

Designed for the temporary preservation of bodies, this table is obligatory for the presentation of deceased persons who have not received conservation care in a funeral home yet. Robustly manufactured in 304 stainless ...

Equipment intended for the temporary preservation of bodies, this table is obligatory for the presentation of deceased persons who have not received conservation care in a funeral home yet. Identical in design to the ...

... with drain hole and condensate drip tray. Description Equipment intended for the temporary preservation of bodies, this table is obligatory for the presentation of deceased persons who have not received conservation ...

Work table made of high-quality stainless steel in hygienic design, with worktop in sandwich design and open base. Worktop thickness: 1 mm Base shelf thickness: 0.8 mm Stainless steel Robust design made of ...

Work Table 100x750x850 mm Robust design made of square tubes, worktop folded on all sides. Underside of tabletop lined with chipboard on the underside and lined with stainless steel sheet. Height-adjustable ...

Packing table 1800x900x850-1150 mm Hupfer's height-adjustable packing table features a sturdy work surface that can be electrically adjusted from 850 to 1150 mm. With a load capacity of 175 kg and a worktop ...

table with one bay with plastic siphon dimension of the sink: 670x470x300 mm 870x470x300 mm 1070x470x300 mm 1270x470x300 mm back edge of table upraised to 40 mm, the rest of edges are flat masking ...

... 1400 x 600 x 850 mm table with two bays back edge of table upraised to 40 mm, the rest of edges are recessed two bays with plastic siphon; dimensions: 400x400x250 mm masking frame in front under ...

back edge of table upraised to 40 mm, the rest of edges are recessed bay with plastic siphon on the right side of the table top; dimensions: 400x400x250 mm under the table top three ...

... be used with one hand, anti-better table top, PVC edging, plastic steel frame, U-shaped base, and can be used with the bedside table. Material Powder coated steel base, powder coated steel column. Table ...

... . *Double-layer work table with stainless steel plate for the work surface and rectangular stainless steel tube for the second layer. *Work table feet with high quality rubber sleeve，avoid direct ...

... stored. *Four slient casters of 3 inch diameter, two with brakes, easy to install, stable and smooth. *Stainless steel 304 table top, with two drainage through and the height difference from left to right is 1.5cm to ...

Stainless steel main structure 60mm upraised back edge Three drawers placed under table Adjustable six legs TECHNICIAL SPECIFICATIONS Depth : 60 cm Length : 140 cm Height : 85 cm

Stainless steel main structure 60mm upraised back edge Three drawers and double door cabinet Adjustable four legs TECHNICIAL SPECIFICATIONS Depth : 60 cm Length : 130 cm Height : 85 cm

60mm upraised back edge Three side covered bottom shelf Adjustable four legs TECHNICIAL SPECIFICATIONS Depth : 60 cm Length : 120 cm Height : 85 cm

Foldable side table made of a 4mm thick alupanel (aluminium-polyethylene-aluminium multilayer), in aluminium grey colour. The table is held up by painted steel arms. The height of the table ...

Procedure Table Procedure table on wheels This MOSYS TP procedure table is available with or without wheels. It is also available with or without the base shelf, so that it can ...

Procedure Table with 1 Set of Drawers Procedure table on wheels This mobile MOSYS TP procedure table comes equipped with an overbridge and 1 set of 3 drawers. It has a white HPL ...

... - Completely in stainless steel, the Autopsy table is mounted on a center support column. The work surface features a high, profiled surround and a seamlessly welded basin is affixed to the end of the table, ...

... is affixed to the end of the table, with a negative inclination arranged diagonally to the drain. Weight - 65 kg Technical data Package - Strong cardbox on wooden pallet Accessories Body support Steel table ...

It is designed for operating and intervention rooms by considering user’s expectations, made of 304 quality stainless steel. GENERAL FEATURES -Two shelves in shape of falcate. -Upper tray with barrier. -6 castors, three of ...

It is made of 304 quality stainless steel, designed by taking to consideration the user's wishes for the newborn and baby services of hospitals. Two batteries, one of which can be controlled by photocell and the other manually, provide ...

It is designed by considering user requests for operating rooms, outpatient clinics and laboratories. Made of 304 quality stainless steel. Thanks to its chamber that can be closed with a 2” diameter ball valve, it provides easy emptying. SPECIFICATIONS Dimensions 600x1600x845 Sink ...

These height-adjustable packing tables have mainly been designed with people packing instrument sets in the central sterilisation unit in mind. Our packing table allows your staff to work in an ergonomic ...

Preparation- and washing table, foldable version. With adjustable feet Movable on 4 castors, (Ø 125 mm). Dimensions L/W/H: 2050 x 750 x 850 mm Payload: max. 200 kg

Tabletop (thickness 60 mm) with negative diagonal fold and gradient towards the drain (Ø 50 mm), soundproofing coating on the bottom. Circumferential, beaded rim, bucket holder. With adjustable feet. Movable on ...

Autopsy table. With rectangular central column, tabletop with negative diagonal fold, without height adjustment. Specially designed for the funeral sector. Dimensions (L/W/H): 2600 x 850 x 850 mm Loading ...

Flat shelf Structure And Finishings Made of 18/10 stainless steel.