Tibia compression plates

Length: 75.1, 187.1 mm

... Dualtec System 2 technology: polyaxial holes allowing +/-10° angulation (20° cone) Distal Tibia Plate 2 types of plates: hook and standard 1 short plate using a ...

Length: 253, 205, 155, 109 mm
Thickness: 3.5 mm
Number of holes: 19, 15, 11, 7 unit

The Distal Anterolateral Tibia Locking Plate is a proven osteosynthesis system for various distal tibia fractures. The special feature of this implant is the free choice of screw placement. ...

Number of holes: 4, 16 unit

... the femur and tibia. The small plate set is indicated for use in various small bones including the metacarpals, metatarsals, phalanges, calcaneus and those of the ankle. In addition, the cancellous, ...

Length: 85, 207 mm
Hole diameter: 3.5 mm
Number of holes: 4, 6, 8, 10, 12 unit

Made of continuous carbon fibers reinforced polymer Circumference radiopaque marking outlining plate contour for positioning Poly-Axial locking screws - up to 10° trajectory variation Features Radiolucent: Enhanced ...

Length: 85, 240 mm
Number of holes: 3, 15 unit

... from complex fractures caused by mild injuries. Anatomical plate; right & left. 7 hole options between 3-15. TRUE LOCK Proximal Tibia Lateral Anatomic Plates are made of Ti6Al4V ...

Hole diameter: 4, 3.5, 2.7 mm
Number of holes: 10, 8, 14, 12, 6 unit

... Self-tapping Locking Screw ► Cancellous Screw ► Limited contact profile. Design reduces plate to-bone contact, limiting vascular trauma ► Available for left and right tibias

... different sizes and numbers of holes for each type of plate. The use of cortical screws, self-tapping cortical screws and cancellous bone screws in different sizes are recommended for each plate model.

Length: 56, 66 mm
Number of holes: 5, 4 unit

... Bottom undercuts of the shaft part • limited bone-to-plate contact • better blood circulation of periimplant tissues Compression hole • oblong hole for plate positioning • ...

Length: 59, 163 mm
Thickness: 3.3 mm
Hole diameter: 2.7, 3.5, 4 mm

Through their usage, the modern principles of osteosynthesis can be applied. The plate types - that work as fixateur interne in case of load transfer between the fractured bone parts - ensure good circulation, and support ...

Length: 3.5, 5 mm

3.5mm Proximal Tibia Medial Posterior Locking T-Plate 3.5mm Proximal Medial Tibia Locking T-Plate 3.5mm Low Bend Proximal Lateral Tibia Locking L-Plate 3.5mm ...

Proximal tibia locking plate（Curved） Proximal tibia locking plate（Straight type）

Length: 118, 288 mm
Hole diameter: 4.5 mm
Number of holes: 4, 14 unit

... PROXIMAL TIBIA LOCKING PLATE - 4.5 mm – RIGHT 2329-004 4 Holes 118 mm 2329-006 6 Holes 152 mm 2329-008 8 Holes 185 mm 2329-010 10 Holes 220 mm 2329-012 12 Holes 254 mm 2329-014 14 Holes 288 ...

Length: 126, 158, 190, 222, 286 mm
Thickness: 3.5 mm
Number of holes: 4, 6, 8, 10, 14 unit

The plate is indicated for fixation of intra- and extra-articular fractures and osteotomies of the distal tibia. A good anatomical fit of pre-contoured plates is ideal to decrease ...

Thickness: 5 mm

Size: 5xl8xl44xL 5x18xl44xR 7xl8xl84xL 7xl8xl84xR 9xl8x224xL 9xl8x224xR 11x18x264xR 11x18x264xR

- Optimal Fit - Screw Trajectory - Fully Instrumented System - Pre-contoured Plates - Thin profile towards the joint line

Length: 102, 302 mm
Thickness: 5 mm
Hole diameter: 5.1 mm

The tibia XLOC plate has an anatomically pre-shaped proximal head. The shaft of that anatomical bone implant is adapted to the Tibia bone. FEATURES Anodized type II Reduced risk ...

... of the plate is the same at all the sizes, there are 10 holes for locking screws. The shank part of the plate has from 4 to 12 locking holes and one oval hole. The longer plates enable ...

... the ankle joint. The plates are designed to be used with both locking and non-locking screws although locking screws provide stronger and more stable fixation. All the plates have compression ...

Anatomically pre-formed plate design High primary stability thanks to Ø 4.5 mm locking cortical screws Combination holes for locking or standard screw connection Screw position converging by 5 degrees in order to avoid ...

As a buttress plate on the lateral tibial plateau.

Length: 88.1, 168.1 mm
Thickness: 3.5 mm
Number of holes: 3, 8 unit

Temporary fixation of intra-articular fractures of the distal tibia and proximal humerus fractures in adult patients.

Length: 64, 87, 98.5, 121, 199.7 mm
Thickness: 1.6 mm
Number of holes: 2, 4, 5, 7, 13 unit

... ankle joint. The plates are designed to be used with both locking and non-locking screws although locking screws provide stronger and more stable fixation. All the plates have compression ...

Number of holes: 6, 4, 3 unit

•The Ankle Locking Plate and Screw System offers multiple fixation options in a variety of configurations. The low-profile plates are constructed of titanium and are used with solid locking and non-locking ...

Length: 68, 84, 100, 116, 148 mm
Number of holes: 3, 4, 6, 8, 5 unit

T-Plates for Tibial and Humeral Head fractures, proximal - medial for Left and Right

Length: 113, 408 mm
Hole diameter: 5.1 mm
Number of holes: 6, 12, 16, 22 unit

The Vortex polyaxial plate system offers solutions for the whole body with 30 plates and only 3 screws and also ensures cross-referencing between instruments. The Vortex DiaphysisLarge (VDP Large) ...