Titanium implant abutments

Pre-milled abutment Blanks. The new Titanium Pre-Milled abutment blanks are one piece customized titanium abutments with your in-house milling equipment. Abutment ...

Implant diameter: 3.3, 4.1, 5 mm
Implant length: 2, 3, 4 mm

Implant length: 18.85 mm

... anchoring system. HEXAGON Allows tightening of the interface connector to the implant. CIRCULAR SUPPORT BASE With a diameter of 6 mm or 4.5 mm (depending on the chosen abutment model), and where ...

Implant diameter: 4.5 mm
Implant length: 7, 5 mm

Implant diameter: 3.5, 4.5, 5.5, 6.5 mm

... research. Implantswiss follows the latest trends and initiates extensive and contemporary projects that may lead the future of implant dentistry. Implantswiss products are manufactured with the state-of-the-arts technologies ...

Implant diameter: 3.75, 5 mm
Implant length: 0.5 mm - 7 mm

BALL ATTACHMENTMSI France Ball Attachments are made of Titanium alloy grade 5 and available in different heights ranging from 0.5 mm to 7 mm.The height is selected according to the height of gums. Snap structure of MSI ...

Made of titanium grade 5 ELI.Their grooves allow for the vertical embedding of any restoration material. It also has the SelectGrip® treated surface to improve its retention capacity.Models are available for most of the ...

Implant length: 2 mm - 3 mm
Implant angulation: 17 °

... 2 / 3 mm Material: Titanium TI-6AL-4V ELI Package Includes: 17° Angular Multi Unit Titanium Abutment Multi Unit Holder Screw for ...

Implant diameter: 4 mm - 6.5 mm

An abutment combined with a set screw, for a bridge prosthesis Using a 1.2 Hex Driver Fastening torque : Narrow 20Ncm Regular / Wide 30Ncm Protect cap is optional

Implant diameter: 3.5 mm

Titanium abutments for a temporary tooth I Non rotational 0 3,5 mm + retaining screw P/N 1414 APPH35 Rotational 0 3,5 mm + retaining screw P/N 1414 APPR35 Since 25 years, IDI firm (Implants ...

Implant diameter: 5, 6 mm
Implant length: 5, 6, 7 mm

External Hexagon Implants Cylindrical implant Cylindrical implant - SHORT The package includes: implant, cover screw, transporter, retaining screw

Z2Plus® multifunction abutment The Z2Plus® multifunction abutment can be used not only as an implant carrier but also as an impression abutment for the closed tray technique ...

Implant diameter: 3.75 mm
Implant length: 9.5 mm

Implant length: 2, 3, 4 mm
Implant angulation: 17, 30, 45, 52, 60 °

The Multi-Unit system provides a solution for screw-retained prostheses; even on complicated-to-restore implants (for example, multiple tilted implants). The Multi-Unit system comprises a full range of ...

Implant diameter: 3.8, 4.2 mm
Implant length: 8.5 mm - 11.5 mm

Our wide variety of straight abutments remain stable even when their wall thickness is reduced to 0.1 mm. They are suitable for use in multiple scenarios, for example, single crowns, bridges and the fabrication of cement-retained ...

Implant diameter: 4.13 mm
Implant length: 4.6, 6.1, 7.6 mm

... consideration for the modeling of soft tissues and the choice of the LEM abutment. All LEM abutments should be inserted with 45Ncm torque for bridges and extended work. 65Ncm for single implants.

Implant diameter: 3.75 mm
Implant length: 0.5 mm - 6 mm

... structure connected by a click to the removable denture. The abutment is available in different heights – 0.5,1,2,3,4,5,6mm – selected according to the height of gums. The snap abutment is designed ...

Resolves unsuitable implant positioning in the front sector, allowing – the creation of cement-retained prostheses with a high aesthetic result thanks to the 45° angle. It is an excellent prosthetic solution if it is ...

Implant diameter: 4.1 mm

Bone Level Straight Abutments are designed to be extended through the thickness of gingival tissue and into the oral cavity. Straight abutments can be directly fastened into the implant. ...

Temporary Abutment Engaging VINH0601 Non-Engaging VINH0602 Categories: Prosthetic components, Screw Retained Vulkan® is a modern, cutting-edge European dental implant brand, established in Barcelona ...

Implant diameter: 3.3 mm - 4.8 mm
Implant length: 1.5, 3 mm
Implant angulation: 25, 18 °

... angled abutments. The angled abutments are delivered with a definitive abutment screw. The abutment screw is also made from a titanium alloy. You ...

Implant diameter: 4 mm - 6.5 mm

... prosthesis - All-in-one abutment and screw structure Conventional Abutment and sylbutment The principles of The principles of SYLBUTMENT are easily discovered around us. In a conventional abutment, ...

Implant diameter: 4.8 mm
Implant length: 8.5, 11.5 mm
Implant angulation: 30, 25, 15 °

... using straight and angulated abutments (0°, 15° and 25° angulation in reference to the longitudinal angle to the implant). A passive fit of the implant crown over the cemented abutments ...

Implant diameter: 4, 6.5, 5 mm
Implant length: 2, 1, 4, 3, 5 mm

All our abutments are systematically delivered with the transfixation screw (KVP). The laboratory screw (KVPL) is offered on demand. The KVP screw must not be used by the laboratory. There is not 1mm lenght for the ...

Implant length: 8, 9 mm

... aesthetic final abutment is based on a reverse crown/concave profile, in order to ensure that clinicians obtain the highest aesthetic results. Ranging from narrow to wide with different angles and gingiva heights, TAG’s ...