Vacuum valves

... (Order separately.) The valve is typically used for applications in which the sample is above ambient pressure, but can also be used at subambient pressures, such as when the sample is pulled through the valve ...

... rotary valve line, able to cover many standard applications. The HDM rotary valve has been designed using finite element analysis to make the housing even more robust. The HDMC rotary valve ...

The Vac AVB area valve is used to shut off VACUUM line pipes; it consists of a Ø 28 mm chemically nickel-plated copper pipe, a 1" ball valve and a G 1/4" F R threaded stub end for the ...

... switching characteristics is every bit as important. The Whisper Valve Type 6724 combines all of these traits and, thanks to its modular structure and range of available material variants, this valve ...

The 750RP Pressure Relief and 750RV Vacuum Relief valves are designed for high precision applications requiring exact automatic pressure or vacuum relief over a wide range of pressure ...

1/4T VALVE LOW PRESSURE BALL VALVE Maximum operating pressure (bar) : - 30 Gas compatibility : - Medical gas + Vacuum

This valve series has been specially developed for use in haemodialysis machines and other medical devices. The design considers the specific requirements of this market. Used as an inlet or outlet valve ...

... Bodied Check Valve, Viton Diaphragm, 3.2mm (1/8") ID Tube, Cracking Pressure 0.5 psi Extended Description In-line, Polypropylene bodied check valve complete with Viton diaphragm and plain stem ports ...

... intrathoracic pressure during the recoil phase of CPR by selectively restricting unnecessary airflow into the chest. This vacuum increases preload, lowers intracranial pressure (ICP), and improves blood flow to the brain ...

The area sevice valves (or secondary valves) ensures: the vacuum and pressure defaults warning the isolation of medical gas circuit connected to the hospital's piping system in case ...

... position. The valves have a full port design and incorporate an adjustable packing and a blow-out proof stem. Ball valves shall be designed for working pressure up to 600 psig WOG. Valve ...

... filter - Coding of the base part of the valve and base - Valves for O2, N2O, CO2, vacuum, air 5 bar - Standards: DIN 13260-2 LST EN ISO 9170-1:2008 Plugs for O2, AIR, N2O, ...

Aerial outlet valve with thread for equipment or for a flexible hose. Features: • Available for oxygen, vaccum, medical air and nitrous oxide (please consult our staff about other gases).

... accomplished by either active or passive scavenging. • When a vacuum or source of negative pressure is connected to the scavenging interface, the system is described as active. • When a vacuum or ...

... simple – yet effective device ensures proper vacuum control. The Matrx Scavenge Control Valve connects to the vacuum hose and allows for visual monitoring of vacuum ...

For control of most common medical gases, including nitrogen and vacuum Includes copper extensions and gauge port Full port flow-through design reduces gas flow restrictions Complies with Federal Standard WW-V35B ...

... the application is mainly in hospitals and clinical departments The control and shut-off valve box monitors the pressure of medical gas or vacuum supplies to the following unit (ward, operating ...