Valves

5-20 cm H2O Designed for use with manual resuscitator Connects to exhalation port of manual resuscitator

The ResQPOD® impedance threshold device (ITD) is a simple, non-invasive device that delivers intrathoracic pressure regulation (IPR) therapy during basic or advanced life support CPR to improve perfusion. The ResQPOD ITD lowers intrathoracic ...

Resuscitation Demand Valve - Designed to Provide 100 % oxygen on demand. Designed to provide 100% oxygen on demand or by button activated supply This Resuscitation Demand Valve should be used in conjunction ...

... single or double configuration. In the case of a simple configuration, a relief valve can be connected if necessary. The dual configuration has automatically two valves: a main valve ...

... position. The valves have a full port design and incorporate an adjustable packing and a blow-out proof stem. Ball valves shall be designed for working pressure up to 600 psig WOG. Valve ...

... reduced, as no build-out is required for an additional alarm box. Combo alarm zone valve box With three ports on each valve, alarm sensors easily mount within the valve box, which ...

The Valved-T’s enable the ability to ‘T’ in a nebulizer. There is a specialty spring valve in place to close the circuit when nebulization is not active. We offer a wide range of fittings to fit in many circuit configurations. Disposable Single-Use ...

Provides positive end expiratory pressure. Variable PEEP Valve 0-20cm H2O

Aerial outlet valve with thread for equipment or for a flexible hose. Features: • Available for oxygen, vaccum, medical air and nitrous oxide (please consult our staff about other gases).

Our Entonox Demand Valve has been designed to be user friendly with low respiratory effort for the patient and also give the end user maximum value for money utilising generic filter systems, a 7-year warranty and 5-year ...

Quick disconnect with swivel Rubber tip with screen Provides variable control from full onto full off Autoclavable up to 136°C/275°F

Line UP Line up of NFPA type, HTM type and JIS type. NFPA： - Conforming to NFPA 99 (2012) HTM： - Conforming to HTM 02-01, HTM2022, BS EN ISO 7396-1 and BS EN ISO 18082 NISTSafety Outlets are designed with different shopes depending ...

It is designed to evacuate the gas in the collectors. It has a single gas outlet point. The collector evacuation is used for relieving the pressure before removing the cylinders from the collector.

... ventilator tubing as to increase the Sp02 of patients Connect the mask and ventilator tubing with three-way valve, and then connect another nozzle of valve to oxygen cylinder or oxygen concentrator

This device installs between the anesthesia machine and the vacuum evacuation system. It equalizes both positive and negative pressure such that no metabolic gases are pulled past the patient. NIOSH recommendation to OSHA: " Workers ...

Description - Hemostatic Flow Valve W/AC Protector Color - Orange Quantity Per Box - 2000 pcs

Bickford PC-1: Pressure Limiting (Pop-off) Valve: Pressure Relief Pop-Off Valve with scavenging outlet. Replaces most older valves which do not have a scavenging outlet for carrying away ...

... in factory. ISO9001:2015. 3Pieces Medical Lockable Line Valve: 3 piece brass ball valve. Available in size 1/2" to 4“. Dual gauge/purge ports 1/8 FNPT . Full port 1/4 turn ball valve. Cleaned ...

... training budget with WNL’s CPR Practi-VALVE® training one-way valve. Replace expensive valves and save your training dollars with these affordable, individually wrapped, and single-use ...

This simple – yet effective device ensures proper vacuum control. The Matrx Scavenge Control Valve connects to the vacuum hose and allows for visual monitoring of vacuum flow. NIOSH guidelines suggest 45 lpm of vacuum ...

The BI Valves work like a faucet, they are connected to the output of medical stations (removing the conventional output with gas connector and impact pin). When the accessory is connected, the valve ...

For control of most common medical gases, including nitrogen and vacuum Includes copper extensions and gauge port Full port flow-through design reduces gas flow restrictions Complies with Federal Standard WW-V35B Type II Class A, ...