Xenon light source 16-2021

for endoscopes

These light sources particularly designed for endoscopic applications. Its colour temperature is very close to daylight, its high intensity light and its servo-shutter make it the ideal pluridisciplinary medical tool. Scope of supply: • The light source with a light cable adapter • A power cable • The present user manual. This equipment is delivered in a pasteboard cardboard box. You must keep this element for further safe transport. CAUTION: Keep the ventilation grills of the light source clear Take care that the location of the light source is well-ventilated (minimum 15cm space on left, right, and rear side of the light source). The light source is equipped with: - A MAIN switch, located on the back panel, - A POWER button located on the front panel, - A LIGHT button, underneath the hour meter, on the front panel. Switch the light source by pressing the main switch (on the back of the light source). The LED (on the front panel) starts blinking. Press the POWER button to turn on the light source. The LED light stays constant: the light source is on stand-by position. Stand-by position: If your light cable is not plugged, there is no light intensity. If your light cable is plugged, you get 20% intensity. Push the LIGHT button to start the light source. To turn off the light source, press the POWER button, the LED blinks rapidly. It means you do not have acces to the buttons: the bulb is cooling down. When cooled down to the appropriate temperature, the light source stops blinking, which implies the light source is off.