Alloy dental material ADORBOND CC

casting

Multi-purposel solder for all non-precious alloys DESCRIPTION Multi-purposel solder for all non-precious alloys in bars: Ø 1.5 mm x ca. 75 mm length >> ADORBOND CC Lot Download Composition Co 62.0 % | Cr 29.5 % | Mo 4.5 % | Si 3.0 % | C, B, Mn, Fe <1% Technical specifications Melting interval TS – TL: 1140-1210 °C Casting temperature T: 1230 °C Processing recommendation The width of the solder gap should be 0.05-0.2 mm. Sand the sides and clean by sandblasting. Fix parts in the solder block. Apply high-temperature flux and preheat the soldering block at ca. 600 ° C. Heat the gap with the flame and put on the solder piece, wetted with flux. Heat up the area around the soldering joint and finally let the solder quickly fire into the gap with the flame. Safety instructions Metal dust is harmful to your health. Use suction. Hypersensitivity to the alloy components should be taken into account. In case of suspected intolerance with certain solder components, the product should not be used.