Mobile X-ray table AGA-AKKU-POWER-DUO-LIFT

tiltingheight-adjustablebattery-powered

In the X-ray tables of the AGA-AKKU-POWER-DUO-LIFT series, battery drives control the electric height adjustment and tilt adjustment via a hand switch. The hand switch is equipped with six buttons. Features The black, radiolucent support plates (tabletop), made of regenerated PE-1000, have a thickness of 15 mm (for table width 650 mm) and 25 mm (for table width 800 mm). To ensure high stability, the base frame is supplied with levelling feet as standard. Battery-powered height adjustment approx. 460 – 860 mm. There are no metal parts in the area between the lifting columns (for a 650 mm table width, approx. 1,200 x 600 mm, L x W, and for an 800 mm table width, approx. 1,200 x 750 mm, L x W). Please note that with the X-ray table with a 2-piece tabletop, the areas of the headrest and the transition to the main surface are only partially radiolucent due to the hinges and the grid. The headrest can be adjusted in 13 locking steps up to +30°. The position of the headrest may be on the left or right side. If no side is specified when placing the order, the X-ray table will be delivered with a headrest on the right side. The two telescopic lifting columns are made of anodized light metal and are controlled by a battery and operated by a hand switch. Connection values per battery unit: 230V, 50/60Hz, 4.0A, 160W, IPX6, v=16mm/s, 2 x 2,000N. Trendelenburg / Anti-Trendelenburg positions of 17° each. The height and tilt adjustments are controlled by the hand switch with 6 buttons (system with key lock and emergency stop). The standard configuration includes: Hand switch with spiral cable and six buttons for operating the height and tilt adjustments.