Reprocessing washer-disinfector endoCleaner

endoCleaner endoscopy washing and disinfection device is equipped with an easy-to-use Radio Frequency Identification (RFID) management system, which automatically records scope serial and model numbers, operator ID, and time of reprocessing. This feature enables to record information about which device has been disinfected by which operator at a given time. endoCleaner endoscopy washing and disinfection device is equipped with an easy-to-use Radio Frequency Identification (RFID) management system, which automatically records scope serial and model numbers, operator ID, and time of reprocessing. This feature enables to record information about which device has been disinfected by which operator at a given time. The endoscope is placed into the basin properly. The basin connector is installed. The biopsy channel hoses, handle connector hoses and aspiration channel hoses are connected. The washing and disinfection process begins with the closing of the cover. After successful connection, the storage unit that the endoscope is placed in is filled with 10 liters of disinfectant and this liquid CONTACTS ALL CONTAMINATED AREAS IN THE BASIN. The disinfectant is delivered through channels with appropriate pressure and amount to enable evacuation of contaminated materials. The disinfection process is successfully accomplished by following rinsing and channel drying. The report of washing and disinfection process can be printed out and this information can be archived by sending them to medGate server. Hygienic silicone cover seal Easy to open and to close transparent cover Double sided specially designed hinge Water tap