Medical gas valve AVB

The Area valve to be installed downstream of the line reducers as required by the standard for medical gas systems; a single device that meets all the regulatory indications of EN ISO 7396-1 relating to the Area Valve; consisting of a ball valve, inlet for specific gas maintenance, connection to the system with connection for Ø 16 mm welded pipe, physical disconnection, seat with check valve prepared for the transducer or the pressure switch for the mandatory signaling of pressure maximum and minimum of the line; predisposed for the installation of a proximity sensor, able to indicate the ON / OFF status of the area valve by transmitting the signal to the relative valve status alarm module. N.One body made of CW617N chemically nickel-plated brass. N.One Ø 16 mm inlet pipe connector. N.One Ø 16 mm outlet pipe connector. N.One inlet shut-off ball valve. N.One emergency socket. N.One physical disconnection. NYLON shut-off valve gaskets. FKM shut-off valve stem and O-Ring for Oxygen, NBR for other gases. EN ISO 7396-1 | NF S 90-116 | UNI 9507 | EN ISO 5359 | DIN 13260-2 | BS 5682 | EN ISO 15001