Gas pressure regulator HG08 Series

two-stage

The 2nd stage unit is made of cast CW614N chemically nickel-plated brass; the device has a pressure gauge that shows the pressure upstream of the reducers and another pressure gauge that shows the operating pressure; there is also a G 1/4" F R threaded fitting which can be used to install any kind of accessory.All the valve seats and pressure gauges are fitted with check valves to prevent gas leaks when servicing; the inlet and outlet connections are of two types chosen by the customer: for Ø 12 mm welded tube with 1/2 "F nut or with direct end (pipe clamp) G 1/2" F for 12 mm tube mm weld-on pipe. The unit also has a block for physical disconnection. N.One regulator body made of cast CW614N chemically nickel-plated brass. N.One Ø12 mm weld-on pipe inlet connection /direct end (pipe clamp) G 1/2" F for 12 mm tube mm weld-on pipe N.One Ø12 mm weld-on pipe outlet connection / direct end (pipe clamp) G 1/2" F for 12 mm tube mm weld-on pipe N.One stainless steel filter. N.Two shut-off valves upstream of each regulator with check valves. N.Two shut-off valves downstream of each regulator with check valves. N.One emergency gas-specific socket. N.One block for physical disconnection. N.One pressure gauge to show system pressure, range 0-16 bar, class 2.5. N.One pressure gauge that measures the outlet pressure, range 0-16 bar, class 2.5. N.One G 1/4" F R threaded fitting for installing a pressure transducer. Stainless steel springs. VITON or NBR membrane. VULKOLLAN regulator seat ring. EN ISO 10524-2 | EN ISO 7396-1 | NF S 90-116 | EN ISO 15001