Emergency ventilator SH230

homeclinicalelectronic

5.6 inch high-definition color touch screen , 5G/WiFi data real-time transmission to meet the clinical needs of patients who get on and are hospitalized.Meanwhile, it has PCV and VCV ventilation modes to support invasive/non-invasive ventilation. The design concept is suitable for clinical trial. It is suitable for adults, children and infants. One button quick ventilation can be used to save emergency time.Guarded in and out ofthe hospital. Meanwhile, carbon dioxide module and oxygen therapy mode can be selected to feed back the patient's breathing status and improve the patient's oxygénation level in real time. 2. Ventilator Quick Start Guide - 2) Connect AC supply (Or use internai battery) ; Connect the power adapter plug to the adapter socket. CAUTION: Orientation of plug and socket.; 3) Connect the oxygen source ; 4) Connect the ventilator line ; 5) Press the supply switch, the ventilator turns on, the system starts self-test, and then enter the Home Screen; 6) After entering the standby interface, press the menu key to select the ventilation mode. 7) Ventilator was put into opération, Oxygen concentration can be adjusted, Tidal volume Régulation, etc. CAUTION: The interval between two boot times was greater than 3 seconds. 3. Précautions for use 1) NOTE ! This product should be stored at -20 ~ 55C ° , relative humidity is not more than 93%. No corrosive gas and strong magnetic field and well ventilated indoor. Please confirm themachine should be placed in a standard environment for more than 8 hours before use, if the storage conditions exceed the requirements. 2) CAUTION! This device is not a household device. The operator must be a trained médical staff.