Calibration reagent CA21

solutionpreservativelaboratory

For calibrating WBC and RBC and monitoring or evaluating the precision of test results on urine sediment analyzer. PRINCIPLE This product is colorless to pale yellow cell suspension. Base on flow cell digital imaging principle, calibrator is sampled into the test channel for picture collection and counting, so as to get the test report. INGREDIENT Veterinary erythrocytes,anticoagulant, preservative solution, cell fixative and etc. NSTRUMENT This product are used on BT URICELL 1280 and URIT UD 1320 Urine Sediment Analyzers. PROCEDURE 1. Remove a vial of calibrator from refrigerator and leave it warm to room temperature (15-30 º C ) for 3 to 5 minutes. 2. Gently invert the vial for 1 to 2 minutes at the first time. For subsequent use, invert 8 to 10 times again is enough. 3. Check whether the calibrator has been mixed well. If not, repeat STEP 2 until completely mixed. 4. Take out the calibrator for routine test or quality control according to the requirements in Urine Sediment Analyzer Operation Manual. 5. Compare the test result with the reference value offered by manufacturer. 6. Tightly cap the vial and store it in refrigerator after use. EXPLANATION VALUES Mean values and acceptable ranges are different from lot to lot. Please refer to the Target Value Sheet attached to the product. It is recommended that each laboratory should establish its own mean values and acceptable ranges. Use the values provided in Operation Manual as reference only. LIMITATION 1. This product is used for monitoring BT URICELL 1280 and BT URIT UD 1320 Urine Sediment Analyzers. 2. Inability to obtain expected values indicates product deterioration.