Duct fan coil unit AXIS™ 45N

The 45N fan-powered units provide a combination of primary air cooling or plenum induction and reheat to meet most application needs at the lowest possible sound levels. Performance Features Fan airflow capacities from 50 to 2000 CFM Primary airflow capacities from 52-3660 CFM Ultra quiet operation for critical sound applications Round inlet sizes from 6 in. through 16 in. diameter 20 gage, galvanized steel casing construction Integral induced air sound attenuator Suitable for low, medium, or high pressure applications Linear, multiple-point, averaging velocity sensor with an amplified signal Damper blade has a flexible gasket for tight airflow shutoff Damper blade operates over a full 90 degrees All damper assemblies utilize a solid ½ in. shaft that rotates in self-lubricating Delrin® bearings Pressure independent or dependent controls, including Carrier i-Vu Open (BACnet), Carrier Comfort Network® (CCN), analog, or pneumatic controls Electric or hot water reheat coils Multiple casing liners available Electric heat (1 to 3 stages) or proportional (SSR) heat Unit casing lined with ½ in. thick, 1-1/2 lb dual density fiberglass insulation that meets UL 181 and NFPA 90A Certified performance in accordance with ARI Standard 880 Reliability Features 20 gage, galvanized steel heaters are ETL listed in accordance with UL standards Heaters equipped with: Primary automatic and secondary manual reset thermal cutout Deenergizing magnetic contactors Airflow proving switch 80/20 Ni-Cr elements Strong integral panel/post construction for product durability Maintenance Features NEMA 2 steel control enclosure for electric or electronic components