1 Vvbsh your hands before sforting.Remove the test vial with the white ’tamper ©vident* cap.
2.Turn on cold water and allow it to run for approximately five minutes before sampling.lfeduoe the ficrw of water to about the diameter ot a pencil.Remcve the white cap completel/. Tilt the vial slighty and slawly fill the vial to the 30ml mark near the top.Do not fill pass mark.Do not
averflow the vial.
Tightly screw the cap on the vial and shake will.making sure that the media in the vial dissolves completely.Set the vial in an upright position and on a fiat surface.
4.lncubate your water sample at températures in the follawing ranges (70°-1 CO^F or 21 °-38 C ) indoors or out doors. A temperature of 95.5°F/35.3‘C is best.
Test results as fast as 24 hours(speed of test results may vary) Test results for bacteria will take a minimum of 24 hours(+-2hours) to complete.Lawer incubation températures and/or
fower bacteria numbers may cause final results to take up to 72 hours.
Store vial in an upright position(out of direct sunlight) until test result is évident.
Shaking vial for 5--10 seconds(every 8-12hours) can enhance color development but is bot required.
Test Results
5.Aifer proper incubation time bas elapsed and results are evident.wifhouf opening the vial.observe the color of fhe liquid.
WHY USE this?
E COLI Water Test is an affordable, easy to use and well designed water test kit for use in the comfort of your home or take it with you when travelling
It is enough to test multiple water sources in your house or cottage (well water, pool or hot tub, pond, or beach water)