Mercury analyzer 5E-DMA3000

pressuretemperatureoxygen

5E-DMA3000 Direct Mercury Analyzer is used to determine mercury content in soil, sludge, waste water, food, produce, cosmetics, feed, fertilizer, coal, cooper concentrate, etc. It is able to directly measure the total mercury in solid and liquid samples without the need of complex sample pretreatment, effectively avoiding the loss of mercury in the pretreatment process, cross contamination and experimental environmental pollution, and ensuring the accuracy of the analysis data. Compared with the traditional chemical vapor generation- atomic fluorescence spectrometry method, the pyrolysis method is more efficient, accurate, stable and reliable in measuring mercury, which can greatly reduce labor intensity, and save 70% of analysis time and cost. Standard Configuration: Computer Integrated Catalytic Amalgamation Tube Amalgamation Tube Resistance Wire Low Pressure Mercury Lamp Sample Boat Sample Holder Operation Principle: Sample is dried by heating and burnt (pyrolysis) in oxygen or air. Its decomposed product is oxidized by the high temperature catalyst carried via oxygen. Meanwhile, interferent like halogen, nitric oxides, and sulfur oxides are absorbed by catalyst. Moisture is exhausted by pneumatic truncation, and the rest of decomposed product is further conveyed to sub-nanometer Hg-trap. Mercury atoms are selectively captured, and experience secondary atomization by heating Hg-trap. Flowing oxygen carries mercury atoms into the cold atomic absorption detector (253.7nm) for determination, and the total mercury content in the sample is directly calculated by the software.