Temperature data-logger D230

conductivitypHlaboratory

Our successful D230 system is a configurable large measurement array. With up to 16 fully loaded D230 racks connected to each other the complete D230 system can measure up to 448 channels. The system is based upon a D230 rack and 2 different measurement modules: D291 and D292. D291 is 4-channel pH/mV/Ion/Dissolved Oxygen measurement modules. D292 is a 4-channel Conductivity/TDS module. Both modules can be used in the D230 system so you can configure a D230 as you wish. The data acquisition software of the D230 system is freely downloadable from our website. It is specially designed to control, collect and store data of a D230 system. I runs under Windows 2000 or higher. All channels are processed at the same time, each in its own window. The software automatically detects the maximum number and type of available channels. Data is collected on-line at a programmable interval determined by the program (4s...24h) Highlights Multichannel up to 448 measurements can be performed at the same time and simultaneous displayed on the screen. No interference between pH/ORP/Ion and conductivity electrodes in the same solution Free data acquisition software to control, collect and store data of a D230 system. Table Data is always stored in a table. Each module has its own programmable table containing an unlimited number of lines. Comments can easily be added to each line in a special information column. Starting Data-logging can start/stop automatically or at a programmable date/time. Data-logging can be stopped or continued at any moment. Files Ali data is saved in a user defined file Just open the nie to view, process or print the stored data =