Dental restoration material 80221

liquid

BiomicTM Stain / Glaze Paint Layer Liquid Paint Layer Liquid 1 • Paint Layer Liquid 1 is used for all 2D coloring pastes and serves as a thinning agent. If only a thin layer of paste needs to be applied, it can be used to reduce the viscosity of the paste. • If the Glaze F Paste is too thick, you can use Paint Layer Liquid 1 to reduce the paste's viscosity. The glaze F paste can be applied thinner with the paint layer liquid 1 and will still produce a glaze effect. • First stir the paste thoroughly with a glass rod to get an even consistency before adding the paint layer liquid 1 and adjusting the consistency. Too much Paint Layer Liquid 1 can interfere with the process. • Do not put the paint layer liquid 1 directly into the paste bottle to stir it. You should mix them with the paste on a palette. Make sure the paste has been mixed thoroughly and is of the right consistency. Paint Layer Liquid 2 • The paint layer liquid 2 is used for all 3D pastes. When the 3D paste has dried, it can be restored with color liquid 2. • The paint layer liquid 2 is used to adjust the viscosity of the 3D paste without affecting the properties of the 3D paste itself. • If the 3D paste is mixed with other liquids, this has a negative effect on the entire process. • The paint layer liquid 2 contains liquid glass components. Close the bottle after use to prevent solidification or spilling of the liquid.