Centralized dust suction unit AS/CAM3

for dental laboratoriesfor milling machineswith filtration system

The AS/CAM3 is suitable to be connected to a maximum of three milling machines. It is equipped with a new generation of universal motors, with a total power of 3000 W single phase 230V, and an electronic microprocessor control that increases o decreases the power to the motors depending on requirements . The motors do not require replacement of the carbon brushes, and they have an average life of approximately 2500 hours. The unit has a main sack filter, with a surface area of 7300 cm² and a secondary cartridge filter of 3650 cm² for each motor. The two filters together comply with grade “H” of filtration under the EN-60335-2-69 standard. The air is discharged by mean of a 7.5 cm pipe direct to atmosphere, reducing air temperature and recycling of untreated dust. Suction activation can be manual, or on request, automatic using a interface designed for any milling machine. The unit is equipped with a sensor that check the status of the filters and in case of filters full, activates a red warning light and switches off the motors activating stand by status. Technical feature: · Air discharge on the right or left. · Box for suction distribution on the right or left. · Noise: 70 dBa. · Dimensions: 78,5x43x71H cm. Theis suitable to be connected to a maximum of three milling machines. It is equipped with a new generation of universal motors, with a total power of 3000 W single phase 230V, and an electronic microprocessor control that increases o decreases tne power to the motors depending on requirements . The motors do not require replacement of the carbon brushes, and they have an average life of approximately 2500 hours.