Ultrasound diathermy unit FISIOSONIC® PLUS

trolley-mounted1-channel

Fisiosonic® Plus is a new device for ultrasound therapy, using an innovative output stage called Class E. The mechanical efficiency obtained through the output stage in Class E is decidedly higher than the one that can be obtained by means of traditional output stages and allows the operator to issue high powers on the patient constantly and with a limited thermal effect. Indications: EPICONDYLITIS MUSCULAR LESIONS IMPINGEMENT SYNDROME TENDINITIS FIBROUS ADHESIONS FIBROMYALGIA MUSCULAR TENSIONS MUSCLES CONTRACTURES ACTIVE HYPERAEMIA The automatic frequency switching is obtained by the exclusive A.F.S. (AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible to exploit the various focalizations of 1 and 3 MHz frequencies at the same time, allowing to set different supplying times for each frequency. This feature allows the operator to obtain a focalized action. The applicators are waterproof for underwater treatments. The instrument can be operated in two modes: continuous and pulsed. The pulsed operating mode permits to modulate the energy (duty-cycle from 10% to 90%) in order to reduce the thermal effect and keep the peak pressure applied by the acoustic wave on the tissues steady. The output power density can be adjusted from 0 W/cm2 to 3 W/cm2 . Fisiosonic Plus® is equipped with self-calibration system and visual and sound contact control system. The appliance is equipped with an inlet for electrotherapy appliance connection (Modulo series); the operator can then carry out a combined therapy with any applicator.