Intraoral X-ray system

on castersdigital70 kV

1. Simple structure: The x-ray generator, central controller, and unit frame are integrated into one unit. 2. Good protection: The radiation is much lower than the national protecting standard. 3. Digital circuit: The digital circuit makes exposure time accurately. 4. The unit is particularly provided for synthesis hospitals、cavity specialty hospitals and dental clinics to take photos. 5. With international level high-frequency technology, automatic protective measures, smart and stable structure, and succinct design, the high-frequency dental x-ray unit is an international level new generation production. Precautions 1. In order to ensure safety in operation and use, good ground lead must be installed well. 2. Because small X-ray machine's thermal capacity is limited, attention should be paid to making the machine work intermittently. 3. Only during exposure process this machine will produce X-rays. It won't produce X-rays in power-off state, neither in power-on state as long as not in exposure. 4. If any unforeseen circumstances occur during correct use, operators should cut off the power immediately and stop using the machine. It cannot be used again until it is overhauled and qualified. 5. Before leaving the factory, each X-ray device is equipped with an additional filter plate with the following specifications:1.0/0.5mm aluminum sheets. 6. Every time when disassemble the machine, disassemble the head first and then other parts. 7. Every time after using the machine, recover the cross arm to the highest point, and then place the machine head in an equilibrium position.