Dental curing light B-Cure DTE

cordlessLED

In the ortho mode that is unique to B-Cure, the light intensity automatically adjusts to 2000mw/cm2. The user can set the single curing time for 3s or 5s, and the device will automatically conduct 10 circles of curing with interval of 1s. One operation can basically finish the cementation of 2 to 3 brackets, which reduces operations and improves efficiency. The light-absorbing peak of traditional material (including camphorquinone;the red line on the figure) is 460nm,so the curing can be done by either general Curing Light or Wide Spectrum Curing Light.But camphorquinone is of a yellow color. It is not suitable to add large amounts of it to bleaching resin or light-colored resins. The light-absorbing peak of new materials (including TPO;the green line in the figure above) is 405nm. Compared with general LED Curing Light, B-Cure owns additional 385nm-420nm wave band which is able to better curing this kind of new material. TPO is of white color.Thus it is suitable for adding to the bleaching resin and light-colored resin. 3 seconds for curing B-Cure is equipped with 5w LED. The maximum light intensity can reach 2000mw/cm2 with such a small size. Curing normal resin that is thicker than 2mm in three seconds. Play an important role in cementation of all-ceramic restoration and orthodontic bracket. Continuous power supply The battery is easy to change by pressing the button on the device. And the battery can be charged separately by putting it on the charger. Two original batteries can keep the device working continuously.