Dental curing light X-CURE DTE

cordlessfor resinLED

Wide-spectrum Curing The photoinitiators of most resin in the market: Camphorquinone,TPO,lvocerin. The main absorption wavelength of these three types of photoinitiators is 385-51 5nm. The wavelength of X-Cure is 385nm-51 5nm,being applicable for the effective curing of most resins in the market. Uniform light intensity brings more uniform curing The uniform distribution of light is important for resin curing in that uniform light output can provide uniform curing effect. Standard of good spatial light intensity distribution: flat top, no sag, no multiple peaks. The figure below shows that X-Cure performs better than other Curing Light and provides a more uniform curing effect. Uniform light output, strong light penetration and a light emission angle of only 20.6°. The light emission angle of other brand Curing Light device is 52°. Light output of X-Cure is more focused and ensures a good deep curing. At 7mm away from the light source, the light intensity can reach 61.5%, but that of other domestic brands Curing Light device is only 25.0%. The highest light intensity can reach 3000mw/cm2 The curing of resin needs enough light intensity. High light intensity ensures adequate curing depth, and reduces curing time, greatly increasing curing efficiency. X-Cure is equipped with 10w LED. The highest light intensity can reach 3000mw/cm2. Guarantee through curing.Except High mode, Soft mode of 1000mw/cm2light intensity is for option.