Oral and nasal endotracheal tube ET30PC

disposable

Endotracheal Tube Standard Basic Information 1. Made of non-toxic medical grade PVC 2. Transparent, clear and smooth 3. With a high volume low pressure cuff 4. With a bevelled tip 5. The bevel is left-facing 6. With a Murphy eye 7. With a pilot balloon 8. With a spring-loaded valve with a Luer lock connector 9. With a standard 15 mm connector 10. With a radio-opaque line which extends all the way to the tip 11. With the 'Magill curve' 12. ID, OD and length printed on the tube 13. For single Use 14. Sterile 15. Cuffed or uncuffed Product Benefits 1. A bevelled tip will pass much easier through the vocal chords than a tube with a cross-cut distal opening. 2. The bevel is left-facing rather than right-facing to allow a better view of the ETT tip entering the field of view from right to left/midline and then passing throught the vocal chords. 3. The Murphy eye provides an alternate gas passage way 4. A pilot balloon which allows for (rough) tactile and visual confirmation of cuff inflation after intubation or deflation just before extubation. 5. A standard 15mm connector allows attachment of a variety of breathing systems and anesthetic circuits. 6. A radio-opaque line is helpful to confirm an adequate tube position on a chest X-ray 7. The Magill curve makes tube insertion easier as the curve follows the anatomy of the upper airway. 8. Designed for Short or Long-Term Intubations 9. The high voloume low pressure cuff applys a lower pressure against the tracheal wall and have a lower incidence of tracheal wall ischemia and necrosis. Sizes ID mm 2.0-10.0 Certifciates: CE certificate ISO 13485 FDA