Dengue fever test kit Test 4

for antigensvirusblood

The Dengue Test Kit (Immunochromatography) is a rapid chromatographic immunoassay for the qualitative detection of Dengue virus antigen in human whole blood, serum, or plasma. For professional use only. [PACK FORMATS] 1 test/box, 5 tests/box, 10 tests/box, 20 tests/box [MATERIALS PROVIDED] 1. Test cassette 2. Disposable pipettes 3. Buffer 4. Instruction for use 5. Lancets(for fingertip whole blood only) 6. sterilizing tablet (for fingerstick whole blood only) [TEST PROCEDURE] Allow test cassette, Antigen extraction buffer to equilibrate to room temperature prior to testing. 1. Open the aluminum foil bag and take out the test card. 2. Put the test card on a horizontal table, unscrew the top cap of the diluted sample, and slowly add 3 drops (about 100μL) of the pre-treated semen sample to the center of the sample hole; 3. Start timing, the reaction results should be observed within 10-15 minutes, and the results are invalid after 15 minutes. Allow the test cassette, and buffer to equilibrate to room temperature (15-30°C) prior to testing. 1. Remove the test cassette from the sealed foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within 60 minutes. 2. Place the test device on a clean and level surface. With the provided dropper, draw whole blood /serum/plasma specimen and then add 2 drop of serum/plasma specimen into the sample well(S). Then add 1 drops of buffer to the sample well(S) immediately. Avoid air bubbles. 3. Wait for the colored line(C) to appear. The result should be read after 10 minutes. Do not interpret the result after 15 minutes.