Wound dressing 20172640056

absorbant

[product name] medical absorbent gauze pad [model and specification] model: type I and type II; specification: length (1cm-600cm) × width (1cm-600cm) - layer (1p-50p). See the product small package for specific specifications. [production license] ysyjx production license No. 20080036 [Registration Certificate No yxzz 20172640056 [technical requirements No yxzz 20172640056 Medical absorbent gauze pad.jpg [structure and composition] this product is made of medical absorbent gauze. [product performance] 1. The product should be folded flat, without burr exposure, odor, mildew, impurities, stains, holes; medical absorbent gauze pad can be detected by X-ray, and there is no breakage, falling off, jumper phenomenon (only applicable to type II gauze pad). 2. The tolerance between actual value and nominal value is ± 10%. 3. The tolerance between actual value and nominal value is ± 10%. 3. The cotton fiber of degreasing cotton yarn cloth should be flat ribbon, 10 μ m to 40 μ m in width, thickened at the end and irregular shape of cavity; the fiber should be purple; the fiber should not be dissolved; there should be no solution showing pink; the warp fiber should be all or almost all cotton fiber, and the weft fiber should be all or almost all typical cotton fiber. In the inspection of warp and weft fibers, a small amount of isolated foreign fibers may occasionally exist; only a small amount of brown purple fluorescence and a small amount of yellow particles should be observed. In addition to a small number of isolated fibers,