10 ml syringe 20182140496

20 mldisposable

product name] disposable dispensing syringe [specification and model] according to the structure, it is divided into two pieces and three pieces; according to the type, it is divided into middle head type and side head type; according to the capacity, it is divided into 10ml, 20ml, 30ml, 50ml and 100ml. According to the needle tip, the dispensing needle can be divided into side hole needle (CZ) and inclined plane needle (XZ); thin wall (TW) and normal wall (RW) according to the needle tip; according to the outer diameter, it can be divided into Φ 0.9mm, Φ 1.2mm, Φ 1.4mm, Φ 1.6mm, Φ 1.8mm, Φ 2.1mm, Φ 2.4mm, Φ 2.7mm, Φ 3.0mm and Φ 3.4mm. [production license] ysyjx production license No. 20080036 [Registration Certificate No yxzz 20182140496 [structure and composition] it is composed of dispensing device and dispensing needle. The dispensing device is composed of a ruler, a zero scale line, a dividing capacity line, a nominal capacity scale line, an outer sleeve curling edge, a cone head, an outer sleeve, a piston, a core rod and a pressing hand; a dispensing needle is composed of a needle base, a needle tube and a sheath. [product performance] 1 the outer cone joint of cone head shall comply with the provisions of GB / T 1962.1-2001 or GB / T 1962.2-2001. 2. Under the water pressure of no more than 100KPA, the flow rate of the side hole needle tube should not be less than 80% of the needle tube with the same outer diameter, length and inner diameter under the same conditions.