Cylindrical dental implant IDALL S

taperedtitaniumtapered internal

Specially designed for the post-extractionnal implant fixture. The new range IDALL was created to respond to clinicians expectations. Extremely simple : uses a single drill to place an implant. Superior efficacy : designed to optimize the primary stability. Safer : keeps the maximum of bone, make the crest extension possible. This implant is surgically easy to use and safe thanks to its specific design and exceptional self-drilling features. FEATURES - Cylindro-tapered shape - Switching platform - Gold Neck - Titanium alloy: TAL6V ELI - S.M.A. and TiO2 state of surface - Morse taper - Cam retention - Anti-unscrewing groove - Penetrating and condensing threads - Double twist threads - Catch base LENGTH: 10mm - 12mm - 15mm - 18mm DIAMETERS: 4,2mm - 5,2mm The rotation speed for all drills is from 1 500 rpm to 2 000 rpm with ample cooling with physiological serum. - The four-bladed drills must be used without in and out movements. - The recommended rotation speed to set an implant is 15 rpm. - The insertion torque during the implant setting may be superior to 50 Ncm with a screwdriver P/N 0046 or 0146; - When the implant is placed on soft bone or very poor mineralized bone (Type IV), use the drill whose diameter is lower than the implant one. - Finish tightening the implant with the ratchet P/N 415 and the screwdriver P/N 0046 or 0146. - The placement of implant can be performed with help of the manual screwdriver P/N 0846. - To optimize the aesthetic result, it is recommended to place the 1 mm implant in a sub-crestal position.