cad

Medical valve MICROSOL Interface IS
stainless steel

Medical valve - MICROSOL Interface IS - IMI Life Science - stainless steel
Medical valve - MICROSOL Interface IS - IMI Life Science - stainless steel
Add to favorites
Compare this product
 

Characteristics

Applications
medical
Material
stainless steel

Description

– 3/2 NC; Manifold mounting – Compact design – High flow – Pilot operated, servo assisted – Long life - in excess of 100 millions cycle rate – Low power consumption – Certification: ATEX, IECEx This valve was specifically designed to meet the stringent requirements of the ATEX industry, ensuring optimal performance and safety in explosive atmospheres. Medium: Air, oxygen, neutral gases (10 % to 95 % humidity, non condensing), 40 μm filtered Operation: Direct acting 3-way valves, normally closed Flow: 160 l/min at 7 bar (101 psi) at +20°C (+68°F) 220 l/min at 8 bar (116 psi) at +20°C (+68°F) kv factor: 2,3 … 3 (Cv: 0,15 … 0,20) Mounting: Manifold Orifice: 3 mm Response time: 25 ms Response time measured according to ISO 12238 Life expectancy: 50 … 100 million cycles (except Hit & Hold valves) Weight: 55 g (0.12 lbs) Ambient/media temperature: -10 ... +40 °C (+14 ... +122°F) Air supply must be dry enough to avoid ice formation at temperatures below +2 °C (+35°F). Materials: Body: PPS Seat seals: NBR, FPM Internal parts: Stainless steel, PA 6/6

Catalogs

No catalogs are available for this product.

See all of IMI Life Science‘s catalogs

Other IMI Life Science products

Valves

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.