Dental laboratory polymerizer Aquamat 689

Aquamat is used for polymerization of acrylic plastics. The unit is designed for work in dental laboratories. It can work without heating so it can also be used as a pressue chamber. The polymerization unit has two working temperature zones which means that it can be heated at two stages. This device has been designed according to the requirements of latest industrial standards. TECHNICAL DATA Electrical supply ~230 V, ±10%, 50Hz Power consumption 1220 W Category of over tension ІІ Effective volume of the chamber 1,5l Interior dimensions Ф140 mm; h=145 mm Maximum operating pressure 6 Bar Limits set for the working temperature 40°С - 125°С Operating temperature zones 2 Limits set for the time 1min – 99min Overall dimensions (WxLxH) in mm 300 x 330 x 240 Model Weight 9,3 кg Working temperature 5°С - 40°С Level of environment pollution 2 The device is designed for usage in normal dental laboratories up to 2000m altitude above sea level. The maximum relative humidity of the air must be 80% for temperatures up to 31°С, decreasing lineally to 50% relative humidity for temperature of 40°С.